Temporarily Replacing S&W 586 L-Comp with...

Published on October 24, 2016
Duration: 5:56

This guide details the process of replacing a standard ramp front sight on a Smith & Wesson revolver with a fiber optic sight. It covers the necessary steps for drilling a new pinhole and installing the sight, emphasizing safety precautions and tool usage. The speaker highlights the improved visibility of fiber optic sights for faster target acquisition.

Quick Summary

The Smith & Wesson 686 Plus is chosen for winter carry over the 586 L-Comp due to its 7-round capacity and ability to handle hotter loads. A common modification discussed is replacing standard sights with green fiber optic front sights for improved visibility, a process that involves careful drilling for the sight pin.

Chapters

  1. 00:00Intro & 586 L-Comp Return
  2. 00:52Carry Rotation Explanation
  3. 01:30Explaining Carry Choice (Hotter Loads)
  4. 02:24Temporary Carry Replacement: 686 Plus
  5. 02:55Installing Fiber Optic Sight
  6. 03:36Drilling for Sight Pin
  7. 03:59Changing Grips
  8. 04:32Final Look: 686 Plus
  9. 04:46Potential New Purchase: Unfluted Cylinder

Frequently Asked Questions

Why is the Smith & Wesson 586 L-Comp being temporarily replaced for carry?

The S&W 586 L-Comp is being sent back to Smith & Wesson for a minor barrel finish issue. This necessitates a temporary replacement for everyday carry duties until the original firearm is returned.

What are the advantages of the Smith & Wesson 686 Plus for winter carry?

The 686 Plus is chosen for winter carry because it has a higher cylinder capacity (7 rounds) and can safely handle hotter, more powerful loads, which are preferred for winter conditions and potential penetration needs.

How can I improve front sight visibility on my revolver?

Replacing standard ramp sights with red inserts with a green fiber optic front sight significantly improves visibility. Fiber optics gather ambient light, making them much easier to acquire quickly, especially in varied lighting conditions.

What is the correct technique for drilling a new sight pin hole?

When drilling for a new sight pin, use a small drill bit (like a #54) and only insert a small portion of the bit into the drill. This prevents the bit from breaking, as only a shallow hole is required for the pin.

More Gunsmithing & DIY Videos You Might Like

More from TheYankeeMarshal

View all →