Raider X1 2000 Lumen Flashlight

Published on July 2, 2023
Duration: 10:02

The Monstrum Raider X1 is a 2000-lumen tactical flashlight combined with an angled foregrip. It features USBC charging, multiple brightness modes including strobe, and attaches via Picatinny or M-LOK (with adapter). While it demonstrated good recoil resistance and brightness, it failed an IPX6 water resistance test due to moisture ingress.

Quick Summary

The Monstrum Raider X1 is a 2000-lumen tactical flashlight and angled foregrip. It features USBC charging, high/low/strobe modes, and attaches via Picatinny or M-LOK. While it performed well under recoil, it failed an IPX6 water resistance test due to moisture ingress.

Chapters

  1. 00:00Introduction: Monstrum Raider X1
  2. 00:20Unboxing and First Look
  3. 01:13Detailed Inspection of Raider X1
  4. 01:53Charging and Controls
  5. 03:05Physical Dimensions and Build
  6. 04:06Lumen Output Testing
  7. 04:34High Mode Performance
  8. 05:12Low Mode Performance
  9. 05:54Drop Test Preparation
  10. 06:19Runtime Test Setup
  11. 06:45IPX6 Water Resistance Test
  12. 07:34Water Test Results and Failure
  13. 08:14Range Test: Recoil and Reliability
  14. 09:07Conclusion and Viewer Engagement
  15. 09:22Final Thoughts and Product Links

Frequently Asked Questions

What is the Monstrum Raider X1?

The Monstrum Raider X1 is a tactical accessory that combines a 2000-lumen flashlight with an angled foregrip. It's designed for mounting on firearms and offers multiple lighting modes, including high, low, and strobe.

How bright is the Monstrum Raider X1 flashlight?

The Raider X1 is advertised to produce 2000 lumens. Actual testing, after calibration, measured approximately 1860 lumens, which is considered reasonably close to the stated output.

How does the Monstrum Raider X1 attach to a firearm?

The Raider X1 features a Picatinny mount with two recoil lugs and screws for direct attachment. It also includes an M-LOK to Picatinny adapter, allowing it to be mounted on firearms with M-LOK handguards.

What are the lighting modes and controls on the Raider X1?

The Raider X1 has high, low, and strobe modes. The strobe mode is activated by a long press (approx. 6 seconds). There is no momentary-on function; a single press turns it on, and subsequent presses cycle through modes or turn it off.

Did the Monstrum Raider X1 pass its water resistance test?

No, the Monstrum Raider X1 failed its IPX6 water resistance test. Moisture was observed to fog the lens, seep from the pressure switch, and exit the unit, indicating a failure to maintain its water-tight seal.

Related News

All News โ†’

More Tactical & Gear Videos You Might Like

More from Moondog 2A

View all โ†’