Tenicor ABDO | Everything you need to know

Published on January 24, 2023
Duration: 28:49

This guide details the setup and adjustment of the Tenicor ABDO magazine pouch. It covers how to adjust retention using screws, modify ride height and cant with the T1 clip, and reverse the clip for ambidextrous use. The guide also provides a method for finding the optimal carry position using a pencil and explains the proper technique for attaching the pouch to a belt, emphasizing the importance of the T1 clip's aggressive hook for securement.

Quick Summary

The Tenicor ABDO is an appendix carry inside-the-waistband magazine pouch designed for support-hand draw. It features adjustable retention via two screws and comes with extra spacers for fine-tuning magazine fit. The ambidextrous design and T1 clip allow for adjustable ride height and cant, ensuring a comfortable and concealable carry.

Chapters

  1. 00:00Introduction to the Tenicor ABDO
  2. 00:18What is the ABDO?
  3. 00:41ABDO Sizes and Fitment
  4. 01:09Retention and Spacer Adjustment
  5. 01:20T1 Clip Features
  6. 01:39Ambidextrous Design
  7. 01:44Kydex Construction and Durability
  8. 02:28Minimalist Design Philosophy
  9. 03:00T1 Clip Attachment System
  10. 04:09What's Included in the Box
  11. 05:38Adjusting Retention on the ABDO
  12. 07:26Adjusting T1 Clip for Ride Height and Cant
  13. 09:11Swapping the T1 Clip for Ambidextrous Use
  14. 12:30Reversing Retention Screws and Spacers
  15. 15:41Finding the Optimal Carry Position
  16. 16:04Easier Method for Fitting the ABDO
  17. 19:43Installing the Clip Based on Pencil Marks
  18. 21:53Setting Up the ABDO Perfectly
  19. 22:21Attaching the ABDO to Your Belt
  20. 24:43Belt Tail Considerations
  21. 25:57Attaching to Rear Webbing or Belt Tail
  22. 27:47Removing the ABDO from the Belt
  23. 28:12Conclusion and Further Assistance

Frequently Asked Questions

How do I adjust the retention on the Tenicor ABDO magazine pouch?

You can adjust the retention on the Tenicor ABDO by using a Phillips head, flat head, or Robertson #1 bit screwdriver on the two retention screws located on the side of the pouch. Tighten the screws clockwise to increase retention and loosen them counter-clockwise to decrease it. The posts are fixed and do not free spin, making adjustment straightforward.

What is the T1 clip on the Tenicor ABDO magazine pouch used for?

The T1 clip on the Tenicor ABDO is used for attaching the magazine pouch to your belt. It allows for adjustable ride height and a significant range of cant adjustment, enabling you to fine-tune the position for comfort, concealment, and draw efficiency. Its aggressive cloth hook ensures a secure attachment.

Can the Tenicor ABDO magazine pouch be used by both right and left-handed shooters?

Yes, the Tenicor ABDO is designed to be ambidextrous. You can swap the T1 clip to either side of the magazine pouch to accommodate both right-handed and left-handed shooters, allowing for a comfortable and efficient draw from your preferred hand.

What are the benefits of the .093 inch Kydex used in the Tenicor ABDO?

Tenicor uses .093 inch Kydex for the ABDO, which provides significantly greater structural strength and durability compared to the thinner .08 Kydex often used by other manufacturers. This thicker material contributes to the overall robustness and longevity of the magazine pouch.

How do I find the best position to carry the Tenicor ABDO on my waistband?

To find the optimal carry position, remove the T1 clip and magazine, place the ABDO in your waistband, and move it around until you find the most comfortable and concealable spot. You can then use a pencil to mark this position on your belt or pants, which will serve as a reference when reinstalling the T1 clip.

Related News

All News →

More Tactical & Gear Videos You Might Like

More from Tenicor

View all →