Must Watch AK Marksmanship Fundamentals, Part2 - Kneeling Position

This video demonstrates a one-handed firing technique with a Chinese AK variant, likely a Type 56 chambered in 7.62x39mm. The demonstration focuses on the mechanical operation of the rifle, including magazine insertion and cycling the action, followed by a single shot fired one-handed at an outdoor range. The speaker's expertise is evident in their safe muzzle discipline and controlled firing.

This video highlights critical firearm safety failures and explains the concept of 'height over bore.' It demonstrates how the difference in height between a firearm's optic and its barrel affects bullet impact, especially at close ranges. The content emphasizes the importance of understanding this principle and adhering to the four fundamental rules of gun safety to prevent accidents.

This guide demonstrates the basic operation of a Chinese AK-74 variant, including magazine insertion, chambering a round, deploying the folding stock, and engaging a target with a red dot sight. The video showcases a single shot fired at a distant target on an outdoor range.

This video demonstrates how to quickly load an AK-47 magazine using a cutaway magazine and a mag pump loader. The process involves indexing the magazine into the loader and using a lever to feed rounds, with the loader automatically orienting each cartridge. The cutaway magazine allows for a clear view of the internal mechanics during loading.

This video compares the practical accuracy of a standard AK-47 pattern rifle against an RPK variant, specifically the Zastava M72. The RPK, with its heavier barrel, longer stock, and integrated bipod, is theorized to offer improved stability and accuracy. The comparison involves shooting both rifles at 100 yards to analyze group sizes.

This video compares the practical accuracy of an AK-47 variant against an RPK clone, the Zastava M72, at 100 yards. The RPK, with its heavier barrel, longer stock, and integrated bipod, demonstrated superior practical accuracy when shot prone, confirming its design intent for increased stability and accuracy.

This comprehensive guide, presented by AK Operators Union's Rob Ski, details the field stripping and basic maintenance procedures for the AK47 platform. It covers essential steps from initial inspection and disassembly to cleaning, lubrication, and reassembly, emphasizing common AK quirks and best practices for reliability. Rob Ski, a recognized subject matter expert, provides practical advice for both new and experienced AK owners.

This guide details the field stripping and reassembly process for the SVD Dragunov rifle, as demonstrated by an expert from AK Operators Union. It covers removing the dust cover, recoil spring, bolt carrier group, gas tube, and barrel/receiver assembly. The speaker highlights the quality of original components and the rifle's historical significance.

This guide details two critical field expedient repairs for the AK-47 platform, as demonstrated by Rob Ski of AK Operators Union. It covers using rubber bands to temporarily replace a broken recoil spring and guide rod assembly, and employing a wooden toothpick to retain the firing pin when the retainer pin is lost. These techniques are presented as emergency measures to maintain firearm operability in austere environments.

This video details the results of a 5000-round endurance test on the Palmetto State Armory AR15 Freedom, conducted by Rob Ski of AK Operators Union. The rifle successfully completed the rigorous AKOU endurance test, including the sand tornado test. While accuracy was deemed respectable for a budget platform (2.24 MOA), internal inspections revealed normal wear on components like the cam pin and bolt lugs. The rifle is presented as a solid budget option, with a recommendation to invest in a better barrel for enhanced long-range precision.