Videos tagged with Extractor Replacement

This guide details the process of replacing a faulty extractor in a Bul Armory SAS II Ultralight pistol, a common issue highlighted by Yoki Sturrup. After experiencing persistent failures to extract with both factory and replacement parts, an aftermarket Atlas Gunworks extractor was installed, resolving the reliability problems. The process involves careful disassembly, component replacement, and reassembly, emphasizing the importance of proper extractor tension for 2011 platforms.

This guide details the field repair of a Brownells BRN-4 rifle following a catastrophic ammunition failure. The video, presented by a professional firearms instructor from Regular Guy Training LLC, demonstrates how a blown-out case can damage components. Despite initial fears of total destruction, the instructor successfully repaired the rifle by simply replacing the damaged extractor, highlighting the resilience of the HK416 platform and the importance of proper diagnosis.

This guide details how to significantly improve the accuracy and reliability of the Ruger 10/22 by addressing factory shortcuts and common quirks. Key areas include ensuring proper barrel-to-stock contact, consistent torque on action screws, meticulous magazine maintenance, careful ammunition selection, and trigger optimization. The video also covers best practices for suppressed shooting and navigating Ruger's customer service.

This video details an ongoing issue with a Walther PDP Pro where the extractor and associated safety components failed within 500 rounds. The speaker highlights Walther's poor customer service and parts availability, contrasting it with the proactive approach of aftermarket manufacturers like Calculated Kinetics. The content serves as a cautionary tale for PDP Pro owners regarding potential part failures and the importance of proper maintenance and support.

This video delves into troubleshooting common issues with 2011-platform firearms, specifically focusing on extractor failures. The presenter, Ben Stoeger, addresses viewer comments and explains that while many believe issues stem from tuning or ammunition, the root cause is often a faulty extractor. He details methods for checking extractor tension, including the 'shake test,' and emphasizes that a new extractor can resolve persistent problems, even after extensive tuning attempts.

This video details the process of fixing issues with an AR-15 by rebuilding the bolt carrier group (BCG) using a kit from 83 Tactical. The instructor demonstrates replacing worn components like the extractor and ejector, and also addresses potential problems with the gas block and gas tube. Proper lubrication is highlighted as crucial for reliable function after maintenance.

This video details a parts-swapping project between a Tisas Regent BR9 and an original Browning Hi-Power, demonstrating disassembly, reassembly, and the interchangeability of parts. The instructor highlights specific components that are or are not compatible between older and newer Hi-Power designs, offering practical advice for gunsmithing enthusiasts. The process includes repairing a damaged trigger pin and upgrading certain parts for improved performance and reliability.

This video details the post-1000 round inspection of a DDI Hammer Forged AK47S, focusing on the critical failure of the original extractor. The presenter demonstrates the process of replacing the extractor and bolt, and crucially, performs a headspacing test with new DDI bolts to verify their 'drop-in' claim. The inspection reveals wear on the trunnion and bolt carrier, but the new extractor and bolts appear to be holding up well, with headspacing confirmed as correct on new components.

This guide details the bolt disassembly procedure for Hungarian 35M, 43M, and G98/40 rifles, which are mechanically identical for this process. The steps involve unscrewing the cocking knob, removing the safety and sear, and then carefully manipulating the extractor and rotating the bolt body to separate the components. This procedure is essential for tasks like extractor replacement and proper maintenance.