JB Weld Fixes Rough G10 Handle by Nutnfancy

Published on June 9, 2010
Duration: 26:29

This guide details a practical modification for the Cold Steel AK-47 knife, addressing its overly aggressive G10 handle texture under the pocket clip. Using JB Kwik Weld, the process involves careful application, sanding, and finishing to create a smoother surface that prevents clothing shredding while preserving grip elsewhere. The video demonstrates a thorough DIY approach, showcasing tools and techniques for a successful repair.

Quick Summary

To fix an aggressive G10 handle that shreds clothing, use JB Kwik Weld epoxy on the problematic area under the pocket clip. After cleaning and masking, apply the epoxy, let it cure for several hours, then sand it smooth with progressively finer grits (e.g., 150 to 400) for a comfortable carry.

Chapters

  1. 00:00Problem: Aggressive G10 Handle Texture
  2. 01:26Solution: JB Weld Epoxy & Planning
  3. 02:36Disassembly & Surface Prep
  4. 04:09Masking & Plugging Screw Holes
  5. 05:08Mixing & Applying JB Kwik Weld
  6. 09:51Sanding & Shaping Epoxy
  7. 11:11Painting & Finishing Handle
  8. 13:46Reassembly & Final Result

Frequently Asked Questions

How do you fix an aggressive G10 knife handle that shreds clothing?

To fix an aggressive G10 handle, identify the problematic area, typically under the pocket clip. Clean the surface, mask off surrounding areas, and then apply JB Kwik Weld epoxy to fill the aggressive texture. After curing, sand the epoxy smooth and repaint if necessary to match the original finish.

What is the best epoxy for modifying knife handles?

JB Kwik Weld is a suitable fast-setting epoxy for knife handle modifications. It offers good adhesion to G10 and a tensile strength of 2424 PSI, making it durable enough for this application after proper curing and sanding.

How do you prepare a knife handle for epoxy application?

Proper preparation involves disassembling relevant parts like the pocket clip, thoroughly cleaning the target area with alcohol or soapy water to remove oils and debris, and masking off any areas you don't want the epoxy to adhere to.

What grit sandpaper should be used after applying epoxy to a knife handle?

After the epoxy has fully cured, start sanding with a coarser grit, such as 150, to level the material. Follow up with finer grits, like 400, to achieve a smooth finish that won't snag on clothing or pockets.

More EDC & Lifestyle Videos You Might Like

More from nutnfancy

View all →