Finding a M249 SAW In The Wild

Published on April 3, 2023
Duration: 0:56

This video demonstrates the critical first steps for safely clearing an M249 SAW after acquisition. It emphasizes a thorough, multi-point inspection process, including checking the bolt, top cover, feed mechanism, chamber, and magazine port for any obstructions or ammunition. The instruction focuses on mechanical verification and safe handling procedures.

Quick Summary

To safely clear an M249 SAW, pull the bolt to the rear and open the top cover. Inspect the feed mechanism, feed tray, chamber, and bolt face for obstructions. Tactilely check the magazine port. Finally, hold the charging handle and pull the trigger to reset the bolt safely.

Chapters

  1. 00:00Introduction to Clearing the M249
  2. 00:10Initial Clearing Steps
  3. 00:15Inspecting the Feed Mechanism
  4. 00:27Chamber and Bolt Face Check
  5. 00:34Magazine Port Inspection
  6. 00:41Closing and Resetting

Frequently Asked Questions

What are the first steps to safely clear an M249 SAW?

The first priority is to pull the bolt to the rear and open the top cover. Then, actuate the feed paws to check for obstructions and sweep the feed tray.

How do you inspect the chamber of an M249 SAW for safety?

After opening the feed tray, visually inspect the chamber and the space between the bolt face and chamber to ensure it is completely clear of any links or ammunition.

What is the correct procedure for resetting the bolt on an M249 SAW?

To reset the bolt, hold the charging handle and pull the trigger simultaneously. This allows the bolt to ride home safely, after which the top cover can be closed.

What parts of the M249 SAW need tactile inspection during clearing?

You should insert fingers into the magazine port to feel for any remaining links or ammunition. This tactile check complements the visual inspection.

Related News

All News →

More General Videos You Might Like

More from T.REX ARMS

View all →