PTRD-41 Bloopers: One Spring vs Two Gun Nerds

Published on May 25, 2018
Duration: 1:52

This blooper reel highlights the extreme difficulty of manually cycling the PTRD-41 anti-tank rifle due to its powerful recoil spring. Ian McCollum demonstrates how the stiff action requires significant force, even with an empty case, to manually operate. The video also touches on a common ejection issue caused by dummy rounds being too long.

Quick Summary

The PTRD-41 is notoriously difficult to manually cycle due to its powerful recoil spring, designed for the 14.5x114mm cartridge. Using dummy rounds with seated bullets can also cause ejection issues as they may be too long for the ejection port.

Chapters

  1. 00:00Initial Cycling Attempt & Spring Tension
  2. 00:25Mechanical Struggle with Action
  3. 00:45Ejection Issue Diagnosis with Dummy Round
  4. 01:15Successful Manual Cycle with Empty Case

Frequently Asked Questions

Why is the PTRD-41 so difficult to manually cycle?

The PTRD-41 is extremely difficult to manually cycle because it requires a very strong recoil spring to handle the immense force of the 14.5x114mm anti-tank round. This heavy spring creates significant resistance when trying to operate the action without live fire.

What causes ejection problems with dummy rounds in the PTRD-41?

Dummy rounds can cause ejection issues if the bullet is still seated in the case, making the overall length too long. This extended length can prevent the round from clearing the ejection port properly when manually cycling the action.

How did Ian McCollum eventually cycle the PTRD-41 manually?

After realizing the dummy round was too long, Ian switched to an empty brass case. He then used his full body weight to physically shove the barrel assembly rearward, overcoming the strong spring tension to successfully cycle the bolt and eject the case.

More General Videos You Might Like

More from Forgotten Weapons

View all →