00-03 Dodge Durango 4.7 Oil Change | Dakota Ram 1500

Published on January 29, 2018
Duration: 4:52

This guide details a step-by-step oil change process for a 2001-2003 Dodge Durango equipped with the 4.7L Magnum V8 engine, applicable also to Ram 1500 and Dakota models. It covers warming the engine, draining old oil, replacing the oil filter with proper seal lubrication, and refilling with the correct oil volume, emphasizing checking for leaks and final oil level verification. The procedure is presented as achievable without lifting the vehicle due to sufficient ground clearance.

Quick Summary

Changing the oil on a 2001-2003 Dodge Durango 4.7L V8, also applicable to Ram 1500 and Dakota, involves warming the engine, draining old oil, replacing the filter with a lubricated seal, and refilling with six quarts of new oil. Ensure the vehicle is on level ground and check for leaks and proper oil level after driving.

Chapters

  1. 00:00Introduction & Preparation
  2. 00:19Warming the Engine
  3. 00:47Draining the Oil
  4. 01:09Replacing the Oil Filter
  5. 02:00Preparing the New Filter
  6. 02:39Installing the New Filter
  7. 02:53Reinstalling the Drain Plug
  8. 03:14Adding New Oil
  9. 03:32Checking for Leaks
  10. 03:44Checking Oil Level

Frequently Asked Questions

How much oil does a 2001-2003 Dodge Durango 4.7L V8 typically need for an oil change?

According to the vehicle's manual, a 2001-2003 Dodge Durango with the 4.7L V8 engine requires six quarts of engine oil for a complete oil change. It's always best to verify with your specific owner's manual.

What is the recommended torque for the oil drain plug on a Dodge Durango 4.7L?

The recommended torque for the oil drain plug on a Dodge Durango with the 4.7L engine is generally between 25 to 30 foot-pounds. It's important not to overtighten to avoid stripping the threads in the oil pan.

Should I lift my Dodge Durango to change the oil?

For most 2001-2003 Dodge Durango, Ram 1500, and Dakota models equipped with the 4.7L engine, there is typically sufficient ground clearance to perform an oil change without needing to lift the vehicle, as long as it is parked on level ground.

Why should I put oil on the new oil filter's rubber seal?

Applying a thin layer of new oil to the rubber seal of the new oil filter before installation is a critical step. It ensures the seal doesn't seize to the engine block, making it much easier to remove the filter during your next oil change and preventing damage.

More Gunsmithing & DIY Videos You Might Like

More from Buckeye Ballistics

View all →