97-03 Grand Prix GT CV Axle Replacement Removal and Install

Published on December 4, 2017
Duration: 24:58

This guide details the process of replacing the CV axle on a 2000 Pontiac Grand Prix GT. It covers the removal of the old axle, including dealing with stubborn bolts and axle nuts, and the installation of the new axle. Key steps involve safely lifting and supporting the vehicle, removing suspension components, carefully extracting the axle from the transmission, and reassembling everything with proper torque specifications. The video emphasizes the importance of using the correct tools and being prepared for tight fasteners.

Quick Summary

To replace the CV axle on a 2000 Grand Prix GT, first remove the wheel and axle nut, then the spindle bolts. Be prepared for tight fasteners and potential misalignment. The inner CV joint is held by a C-clip and may require significant force to separate from the transmission. Reinstallation involves aligning splines and torquing components to specifications, including 90 ft-lbs for spindle bolts and 118 ft-lbs for the axle nut.

Chapters

  1. 00:00Introduction and Preparation
  2. 00:10Removing the Axle Nut
  3. 01:39Dealing with Tight Axle Nuts
  4. 02:17Removing Spindle Bolts
  5. 03:49Stuck Spindle Bolts
  6. 08:00Removing the Axle from the Hub
  7. 09:41Removing the Axle from the Transmission
  8. 12:03Understanding Axle Retention (C-Clip)
  9. 12:48Comparing New and Old Axles
  10. 13:49Transmission Seal Replacement Option
  11. 14:46Installing the New Axle into the Transmission
  12. 15:51Reinstalling Axle through the Hub
  13. 17:24Reinstalling Spindle Bolts
  14. 18:31Repairing Damaged Spindle Bolts
  15. 19:05Aligning and Installing Axle Bolts
  16. 21:15Torquing Axle Bolts
  17. 22:14Torque Specifications
  18. 23:14Torquing the Axle Nut
  19. 23:35Final Steps and Fluid Check

Frequently Asked Questions

What are the torque specifications for the CV axle bolts on a 2000 Grand Prix GT?

The spindle bolts for the CV axle on a 2000 Grand Prix GT are torqued to 90 foot-pounds. Ensure you use a torque wrench for accurate tightening.

How do you remove a stubborn axle nut on a 2000 Grand Prix GT?

Axle nuts are very tight. If it won't budge, reinstall the wheel, put the car in park, and use the vehicle's weight to help break it loose. A breaker bar with a pipe extension is also recommended.

What fluid might leak when removing a CV axle from a 2000 Grand Prix GT?

When removing the CV axle from the transmission, differential fluid will likely leak out. It's important to place a pan underneath to catch this fluid for reuse or proper disposal.

How is the CV axle held in place within the transmission of a 2000 Grand Prix GT?

The CV axle is held in place within the transmission by a C-clip. You'll need to apply sufficient force to pop this clip out when removing the axle, and it will click back into place upon installation.

More Gunsmithing & DIY Videos You Might Like

More from Buckeye Ballistics

View all →