Barrel Break in Procedure Ops style

Published on August 11, 2012
Duration: 19:21

This video details the ONEILLOPS barrel break-in procedure, emphasizing its role in smoothing micro-burrs for easier cleaning and consistent performance. It outlines a step-by-step process involving powder solvent, dry patches, and copper solvent treatments, using specific products like Hoppes #9 and Sweets 7.62. The procedure is repeated for the first 8-12 rounds, concluding when cleaning patches show no copper fouling.

Quick Summary

The O'Neill Ops barrel break-in procedure aims to smooth micro-burrs for easier cleaning and consistent performance. It involves firing one round, cleaning with powder solvent, dry patches, a bronze brush, and copper solvent until patches are clean. This cycle repeats for 8-12 rounds until no copper fouling is detected.

Chapters

  1. 00:00Introduction to Barrel Break-in
  2. 02:25Written Procedure Overview
  3. 02:53Required Equipment and Solvents
  4. 05:24Initial Cleaning of a New Rifle
  5. 07:08Powder Fouling Removal
  6. 07:56Mechanical Scrubbing
  7. 09:00Copper Solvent Application
  8. 10:59Checking for Copper Fouling
  9. 13:01Final Conditioning and Firing
  10. 17:41Conclusion and Repetition Cycle

Frequently Asked Questions

What is the purpose of a barrel break-in procedure?

The barrel break-in procedure smooths out micro-burrs and imperfections in new barrels. This results in easier cleaning and more consistent performance throughout the barrel's service life, whether it's a factory or custom barrel.

What are the key steps in the O'Neill Ops barrel break-in?

The O'Neill Ops method involves firing one round, then cleaning with powder solvent, dry patches, a bronze brush with solvent, and finally copper solvent until patches are clean. This cycle is repeated for the first 8-12 rounds.

What specific cleaning products are recommended for barrel break-in?

Hoppes #9 is recommended for powder fouling, Sweets 7.62 for heavy copper removal, and Tetra Gun oil for final conditioning. A bronze brush is used with Hoppes, and a nylon brush with Sweets 7.62.

How do you know when the barrel break-in is complete?

The break-in is considered complete when, after firing a round and performing the cleaning cycle, the copper solvent treatment yields a completely clean patch with no blue staining.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from ONEILLOPS

View all →