Camaro ZL1 1LE CF Wing Install

Published on August 27, 2017
Duration: 15:55

This guide details the installation of a ZL1 1LE carbon fiber wing onto a Camaro ZL1. The process involves removing the stock spoiler by accessing bolts under the trunk lid liner and using specialized wrenches for tight spaces. A key consideration is the temporary installation without adhesive if the trunk deck requires paint repair. The guide emphasizes the bolt pattern is the same as the stock spoiler and that adhesive removal is manageable.

Quick Summary

Installing a ZL1 1LE carbon fiber wing on a Camaro ZL1 involves removing the stock spoiler using specific wrenches for tight bolts and potentially prying nylon clips. If trunk paint repair is needed, temporarily bolt the new wing on without adhesive until repairs are complete.

Chapters

  1. 00:00Introduction & Project Overview
  2. 00:50Spoiler Removal Prep
  3. 03:56Trunk Liner Removal & Bolt Access
  4. 04:27Trunk Lid Reinforcement Check
  5. 05:18Spoiler Removal
  6. 06:04Adhesive Cleanup
  7. 06:37Spoilerless Camaro View
  8. 07:36New Wing Installation Prep
  9. 08:34New Wing Installation
  10. 09:09Parts Sourcing & Thanks
  11. 09:37Helper & Buddy's Car
  12. 10:07Daily Driven Car Comparison
  13. 10:34Side-by-Side Comparison
  14. 11:06Project Recap & Key Takeaways
  15. 11:23Wing Installation Details
  16. 12:39Trunk Lid Reinforcement Confirmation
  17. 13:10Dash Insert Installation
  18. 13:47Fuel Door Installation
  19. 13:58Final Look & Conclusion

Frequently Asked Questions

What tools are needed to install a ZL1 1LE carbon fiber wing on a Camaro ZL1?

You'll need an open-ended or box-end wrench for the tight center bolts, a screwdriver, and potentially a pry tool for clips. Adhesive remover and alcohol are useful for cleaning the mounting surface.

Is the bolt pattern the same for the ZL1 1LE wing as the stock ZL1 spoiler?

Yes, the bolt pattern is exactly the same, which simplifies the installation process. You will be reusing the existing mounting points on the trunk lid.

What should I do if my Camaro's trunk deck needs paint repair before installing the new wing?

If paint repair is needed, temporarily install the new wing using only the bolts, leaving the protective tape on the adhesive. Once the paint is fixed, remove the tape and seal the adhesive.

Is removing the adhesive from the stock spoiler difficult?

The adhesive on the original spoiler is generally not as difficult to remove as the adhesive for the third brake light, making it a manageable part of the installation.

More from Justin Opinion

View all →