FORGOTTEN WEAPONS’ CURSED AK

Published on June 30, 2020
Duration: 18:10

This guide details the critical inspection and potential repair steps for a poorly constructed AK variant, often referred to as a 'Cursed AK'. It emphasizes identifying dangerous flaws such as improperly formed rivets, detached gas blocks, and critically, ground-down bolt locking lugs. The analysis, presented by expert AK manufacturer Brandon Herrera, highlights the severe safety implications of such build errors and stresses the need for professional gunsmithing if these issues are present.

Quick Summary

Expert AK builder Brandon Herrera identifies critical safety flaws in a 'Cursed AK' build, including ground-down bolt lugs and a detached gas block, which can cause catastrophic failure. He also notes improper rivets and the dangerous implications of the 'third hole' indicating a machine gun.

Chapters

  1. 00:00Introduction and Recovery
  2. 01:51Initial Reaction to the 'Cursed AK'
  3. 03:04External Build Flaws
  4. 04:24Technical Rivet Analysis
  5. 05:46Machine Gun Identification
  6. 06:52Barrel and Gas Block Horrors
  7. 08:52Internal Safety Issues
  8. 12:38Receiver Markings and Final Assessment

Frequently Asked Questions

What are the most dangerous flaws found in the 'Cursed AK' build?

The most critical safety flaws include ground-down bolt locking lugs, which compromise the bolt's ability to contain chamber pressure, and a detached or improperly fitted gas block assembly. These issues can lead to catastrophic failure during firing.

Why is grinding bolt locking lugs so dangerous on an AK?

Grinding down bolt locking lugs removes material essential for safely containing the immense pressure generated during firing. This modification bypasses the bolt's primary safety function, significantly increasing the risk of a catastrophic failure where the bolt or chamber could rupture.

What does the 'third hole' on an AK receiver signify?

The 'third hole' on an AK receiver typically indicates the location for the auto-sear pin, which is a component necessary for full-automatic fire. Its presence signifies that the firearm is a machine gun, subject to strict federal regulations under the NFA.

What are the signs of poor craftsmanship on the exterior of the 'Cursed AK'?

External signs of poor craftsmanship include improperly formed rivets, often described as 'pancake' rivets resembling melted solder, a missing folding stock latch, and a loose or improperly attached gas block assembly. These indicate a lack of attention to detail and structural integrity.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from Brandon Herrera

View all →