Genie 6172H - Garage Door Opener Install - Man Cave Protection - Hoarder House Ep. 4

Published on August 9, 2022
Duration: 34:40

This guide details the installation of a Genie 6172H jackshaft garage door opener, a wall-mounted solution designed to enhance garage security. The process involves mounting the opener to the torsion tube, securing it to the wall stud, installing safety beams and an optional door lock, and connecting the battery backup and wireless components. The video emphasizes careful leveling, proper wiring, and thorough programming for optimal function and safety.

Quick Summary

The Genie 6172H jackshaft garage door opener is a wall-mounted unit that enhances garage security. Installation involves mounting the opener to the torsion tube, leveling it on the wall, installing safety beams (under six inches from the ground), and connecting an optional door lock. The included light module acts as a Bluetooth transmitter for wireless remote connectivity.

Chapters

  1. 00:00Introduction & Purpose
  2. 00:36Installation Summary
  3. 00:48Coupler Installation
  4. 01:54Safety Beam Installation
  5. 02:16Door Lock Installation
  6. 02:47Battery Backup
  7. 03:12Cable Tension Keeper
  8. 03:52Emergency Release
  9. 04:26Power Outlet Considerations
  10. 05:02Light Module Functionality
  11. 06:06Opener Operation Test
  12. 06:23Genie 6172H Model Overview
  13. 06:51What's Included in the Kit
  14. 08:54Tools Required
  15. 10:42Torsion Bar Condition
  16. 11:45Mounting Location: Left or Right
  17. 12:06Mounting the Coupler to Opener
  18. 13:20Mounting Opener to Torsion Bar
  19. 14:17Leveling the Opener
  20. 15:10Pre-drilling for Lag Bolt
  21. 15:37Securing Opener to Wall
  22. 17:11Opener Installation Complete
  23. 17:16Power Connection
  24. 17:41Safety Beam Sensor Installation
  25. 18:53Safety Beam Installation Tips
  26. 20:43Second Safety Beam Hole
  27. 20:46Running Safety Beam Wires
  28. 21:56Connecting Safety Beam Wires
  29. 23:36Installing the Door Locks
  30. 25:51Drilling for Door Lock
  31. 28:20Door Lock Installed
  32. 29:08Installing Cable Tension Keepers
  33. 30:07Wiring and Cable Keepers Done
  34. 30:14Programming Process
  35. 30:42Testing Safety Features
  36. 31:14Wireless System Setup
  37. 31:33Tools Used Recap
  38. 32:25Cable Keepers Not Used
  39. 32:41Cable Inspection
  40. 33:51Crush Mechanism Test
  41. 34:05Conclusion & Q&A

Frequently Asked Questions

What is the primary benefit of installing a jackshaft garage door opener like the Genie 6172H?

The Genie 6172H jackshaft opener is a wall-mounted solution that enhances garage security by providing a more robust and integrated system compared to traditional overhead openers, helping to protect stored items like tools and EDC gear.

How should the Genie 6172H garage door opener be mounted for optimal performance?

The opener must be mounted perfectly level using a level to prevent warping of the torsion tube. The mounting bracket allows for adjustments to achieve this precise horizontal alignment before securing the unit to a wall stud.

What are the key safety features of the Genie 6172H installation?

Key safety features include the installation of safety beams, which must be no more than six inches off the ground, and an optional automatic door lock. The opener also has an auto-reverse mechanism tested with a 2x4.

What is the function of the light module included with the Genie 6172H wireless system?

The light module serves as a Bluetooth transmitter. When plugged into an outlet, it enables the wireless remote to connect to the garage door opener, allowing for remote operation without direct wiring to the opener itself.

More from Marine X

View all →