How To Disassemble, Clean, And Lubricate A Grand Power Stribog

Published on October 27, 2019
Duration: 16:08

This guide details the step-by-step process for disassembling, cleaning, and lubricating a Grand Power Stribog pistol. It covers the necessary tools, including common household items and specialized picks, and emphasizes thorough cleaning of critical components like the bolt face, chamber, and receiver rails. The video also provides instructions for reassembly and function checks, ensuring the firearm is ready for use.

Quick Summary

To disassemble a Grand Power Stribog, remove the magazine and clear the firearm. Push out the captive rear pin, then separate the upper receiver from the lower receiver. Finally, pull the charging handle to remove the bolt assembly. Clean critical areas like the bolt face, chamber, and receiver rails using CLP and appropriate tools.

Chapters

  1. 00:12Introduction and Tools
  2. 01:54Magazine Removal and Safety Check
  3. 02:13Receiver Pin Removal
  4. 02:48Bolt Assembly Removal
  5. 03:51Barrel Cleaning
  6. 04:31Bolt Assembly Cleaning
  7. 05:17Upper Receiver Cleaning
  8. 06:23Lower Receiver Cleaning
  9. 07:13Final Cleaning and Patching
  10. 08:10Wiping Down Bolt and Spring
  11. 08:26Using Polymer Pick for Crevices
  12. 09:54Detailed Upper Receiver Cleaning
  13. 11:00Lower Receiver Detail Cleaning
  14. 11:52Lubrication Points
  15. 13:31Reassembly
  16. 14:33Function Check
  17. 14:55Conclusion

Frequently Asked Questions

What tools are needed to clean a Grand Power Stribog?

For cleaning a Grand Power Stribog, you'll need BreakFree CLP cleaner, a toothbrush, a tipped polymer pick to avoid scratching, and t-shirt scraps or purpose-made patches for the barrel. An Otis rip cord or similar bore snake is also useful for barrel cleaning.

How do you disassemble the Grand Power Stribog?

To disassemble the Grand Power Stribog, first remove the magazine and clear the firearm. Then, push out the captive rear pin, and separate the upper receiver from the lower receiver by pushing down and pulling apart. Finally, pull the charging handle to remove the bolt assembly.

What are the critical areas to clean on a Grand Power Stribog?

Critical areas to clean on a Grand Power Stribog include the bolt face, chamber, receiver rails, and the area under the extractor claw. The inside of the upper receiver, especially where the bolt cycles, also accumulates significant carbon and requires thorough cleaning.

Where should you apply lubricant on a Grand Power Stribog?

Lubricate the contact surfaces of the bolt carrier group and the receiver rails with a thin coat of CLP. A small amount of CLP can also be applied to the spring and buffer assembly and the trigger mechanism's latch. Avoid lubricating the magazine well.

More Gunsmithing & DIY Videos You Might Like

More from Mrgunsngear Channel

View all →