Kimber Pro Raptor II 45 ACP 1911 Review

Published on March 2, 2022
Duration: 19:03

This guide details the field stripping and reassembly process for the Kimber Pro Raptor II, a Commander-sized 1911 in .45 ACP. It highlights the use of a paper clip for the full-length guide rod system, a common technique for this firearm type. The process is demonstrated by Sootch00, a respected firearms reviewer known for his expertise.

Quick Summary

The Kimber Pro Raptor II in .45 ACP is a Commander-sized 1911 praised for its fit, finish, and reliability, with only one failure to extract in 500 rounds. It features a 4-inch match-grade barrel, 8+1 capacity, and a crisp trigger pull averaging 4 lbs 1.4 oz.

Chapters

  1. 00:00Introduction
  2. 01:04Kimber Reputation
  3. 02:13Firearm Overview
  4. 03:13Barrel and Fit
  5. 04:06Aesthetics and Grips
  6. 05:29Slide and Serrations
  7. 06:21Frame and Ergonomics
  8. 07:04Sights and Controls
  9. 07:49Trigger Performance
  10. 08:24Safety and Carry
  11. 09:53Range Performance
  12. 12:21Accuracy Testing
  13. 12:45Field Stripping
  14. 15:04Final Assessment

Frequently Asked Questions

What are the key features of the Kimber Pro Raptor II in .45 ACP?

The Kimber Pro Raptor II is a Commander-sized 1911 featuring all-stainless steel construction, a 4-inch match-grade barrel, 8+1 capacity, custom shop roll marks, unique zebra wood grips with a scale pattern, and 3-dot tritium tactical wedge sights.

How reliable is the Kimber Pro Raptor II?

During testing, the Kimber Pro Raptor II demonstrated high reliability, experiencing only one failure to extract in approximately 500 rounds. This suggests a robust design and quality manufacturing.

What is the trigger pull weight on the Kimber Pro Raptor II?

Using a Lyman digital trigger pull gauge, the trigger break was measured at an average of 4 pounds 1.4 ounces. This is a crisp and light pull, characteristic of a match-grade trigger.

How do you field strip the Kimber Pro Raptor II?

Field stripping involves removing the slide stop, then separating the slide assembly from the frame. The recoil spring and guide rod are removed from the barrel, followed by the barrel from the slide. Reassembly is the reverse, potentially using a paper clip for the full-length guide rod.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from sootch00

View all →