Luger Takedown / Field Strip P.08 Pistol - WW2

Published on January 27, 2019
Duration: 5:50

This video provides a detailed, step-by-step guide on how to field strip and reassemble the Luger P.08 pistol, commonly known as the Luger. Instructor Kurt from Legacy Collectibles demonstrates the process, highlighting the use of specific tools like a Luger tool or screwdriver. Key steps include removing the magazine, disengaging the takedown lever, separating the slide and frame, and then further disassembling the toggle assembly to access the firing pin. The guide also offers tips for reassembly, particularly for re-engaging the difficult takedown lever and ensuring proper alignment of internal components.

Quick Summary

To field strip a Luger P.08, remove the magazine and disengage the safety. Pull the slide back while pushing the takedown lever down, then remove the side plate and separate the slide from the frame. Further disassembly of the slide involves removing the rear toggle pin.

Chapters

  1. 00:00Introduction and Safety Check
  2. 00:10Magazine Removal and Initial Slide Retraction
  3. 00:23Engaging Takedown Lever and Removing Side Plate
  4. 00:34Separating Slide and Frame
  5. 00:45Disassembling the Slide: Rear Toggle Pin Removal
  6. 01:14Identifying the Breech Block and Components
  7. 01:27Removing the Firing Pin Assembly
  8. 01:55Identifying WW2 Firing Pin Features (Flutes)
  9. 02:16Reassembly: Firing Pin and Breech Block
  10. 02:50Critical: Proper Retaining Pin Rotation
  11. 03:11Reassembly: Takedown Lever Installation
  12. 03:45Reassembly: Breech Block into Slide
  13. 04:16Reassembly: Attaching Slide to Frame
  14. 04:50Reassembly: Side Plate Installation
  15. 05:05Final Steps and Magazine Insertion
  16. 05:36Conclusion and Call to Action

Frequently Asked Questions

How do you start field stripping a Luger P.08 pistol?

Begin by removing the magazine and ensuring the safety is off. Then, use the play between the slide and frame to pull the slide back while simultaneously pushing the takedown lever down. Once the lever is down, you can remove the side plate and separate the slide from the frame.

What tools are needed for a Luger P.08 field strip?

For a basic field strip, you might only need your hands. However, for further disassembly of the slide, such as removing the firing pin assembly, a screwdriver or a specialized Luger tool (originally issued by the German military) is recommended.

How do you reassemble the firing pin assembly on a Luger P.08?

Ensure the firing pin's groove aligns with the breech block's groove. Push down on the retaining pin's groove and the spring to get it below the breech block surface, then twist slightly to lock it. The retaining pin should end up in a vertical position.

What is a key difficulty when reassembling a Luger P.08?

Reinstalling the takedown lever back into the frame can be difficult. A helpful technique is to apply pressure to the bottom of the lever and use its leg as leverage to pop it back into place.

More Gunsmithing & DIY Videos You Might Like

More from Legacy Collectibles

View all →