The Dumbest Things I've Done With Guns

Published on February 20, 2026
Duration: 15:57

This guide details the critical importance of safe reloading practices, particularly when working with wildcat cartridges. It highlights the dangers of starting with maximum charges, the impact of environmental conditions on pressure, and the severe consequences of overpressure, such as case head separation. The speaker emphasizes the need for meticulous load development and professional inspection after any firearm malfunction.

Quick Summary

Never shoot pitted steel targets, as the pits can cause bullet fragments to ricochet back at high speeds. Always wear safety glasses and avoid rushing when handling firearms or reloading, as mistakes can lead to severe injury, such as primer explosions or case head separations.

Chapters

  1. 00:00Introduction: Guns are not toys
  2. 00:14Mistake 1: Shooting Bricks with a Pellet Gun
  3. 01:44Consequences of Pellet Gun Incident
  4. 02:10Raid Shadow Legends Ad Break
  5. 03:40Mistake 2: .45 Raptor Overpressure Reloading
  6. 05:05Disaster: Case Head Separation
  7. 05:53Tollcraft Bolt Customer Service
  8. 06:33Mistake 3: Shooting Pitted Steel
  9. 07:35Ricochet Incident
  10. 08:10Mistake 4: .50 BMG Chicken Leg Test
  11. 09:56Disgusting Results of .50 BMG Test
  12. 10:13Honorable Mention: .30 Carbine Blow Up
  13. 10:23Fake Chinese .30 Carbine Rounds
  14. 11:06Mistake 5: Primer Explosion on Finger
  15. 11:54Primer Explosion Details
  16. 12:42ER Visit for Primer Injury
  17. 15:13Final Safety Advice

Frequently Asked Questions

What are the dangers of shooting pitted steel targets?

Shooting pitted steel targets is extremely dangerous because the indentations can act like wrap-around surfaces. This can cause portions of the bullet to fragment and ricochet back towards the shooter at high velocities, leading to serious injury.

What caused the case head separation in the .45 Raptor reloading incident?

The case head separation was caused by excessive pressure, likely due to starting with a maximum powder charge in hot weather without proper load development. This extreme pressure exceeded the brass's limits, leading to the failure.

How can reloading accidents like primer explosions be avoided?

To avoid primer explosions during reloading, always ensure primers are fully removed from cases before annealing or other processes. Rushing the process or not double-checking steps can lead to dangerous oversights, as seen when a live primer was left in a case.

What is the primary lesson learned from the .50 BMG chicken leg test?

The primary lesson is that extreme caution and common sense are paramount when testing powerful firearms. The .50 BMG test, while exploring muzzle blast, resulted in a dangerous and messy situation due to the uncontrolled expulsion of debris and water.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from Banana Ballistics

View all →