The Forgotten Weapons Cursed AK Is FIXED!

Published on April 30, 2021
Duration: 10:34

This video details the extensive gunsmithing required to repair a dangerously flawed AKS-74U (Krinkov) build originally reviewed by Forgotten Weapons. Brandon Herrera and his team identified critical safety failures, including a poorly installed gas block and a dangerously modified bolt. The restoration involved replacing components, re-riveting the receiver, and ensuring proper headspace and function, culminating in a successful range test.

Quick Summary

Brandon Herrera's team repaired a dangerously flawed AKS-74U (Krinkov) build. Critical issues included a loose gas block and a bolt with ground-down lugs, posing a severe safety risk. The restoration involved proper riveting, a new bolt, and ensuring correct headspace for safe operation.

Chapters

  1. 00:00Intro: The Cursed AK Problem
  2. 02:20Technical Flaws: Amateur Construction
  3. 03:57Barrel & Gas Block Issues
  4. 05:41Bolt & Safety Critical Failures
  5. 06:56The Restoration Process
  6. 08:28Range Testing & Conclusion

Frequently Asked Questions

What were the main safety issues with the 'Cursed AK'?

The 'Cursed AK' had a gas block that flew off due to improper installation, and critically, the bolt lugs were ground down to 'fix' headspace, creating a risk of catastrophic failure. Poor riveting also compromised structural integrity.

How was the AKS-74U 'Cursed AK' restored?

The restoration involved replacing the faulty bolt with a Bulgarian AK-74 part, reverting the caliber to 5.45x39mm, and properly re-riveting the receiver. A custom barrel blank was machined to ensure correct press-fit for oversized journals.

Why is proper gunsmithing crucial for AK builds?

Proper gunsmithing ensures safety and reliability. Critical components like the bolt, gas block, and receiver rivets must be correctly installed and machined to prevent dangerous failures, especially during firing.

What specific machining errors were found on the 'Cursed AK'?

The build exhibited a brazed/soldered gas block instead of a press-fit one, poorly executed Dremel work on selector notches, and non-touching rivets. The barrel pin hole was also egged out.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from Brandon Herrera

View all →