The Worst AK I have Ever Seen

Published on October 17, 2024
Duration: 0:59

This video showcases a spectacularly failed AK build, dubbed 'Gunsmithing Jackass,' by Ian McCollum of Forgotten Weapons. The firearm exhibits critical flaws including an improperly installed stock latch, a brazed gas block on a Dremel-ground barrel, and dangerously ground locking lugs for headspace. Internal receiver rivets were also left unfinished, compromising structural integrity. The build serves as a stark warning against improper gunsmithing techniques.

Quick Summary

The 'Gunsmithing Jackass' AK build features critical flaws like a missing stock latch, a brazed gas block on a Dremel-ground barrel, and dangerously ground locking lugs for headspace. Internal receiver rivets were also left unfinished, making it one of the worst firearm constructions seen.

Chapters

  1. 00:00Introduction: Gunsmithing Jackass
  2. 00:06Overall Horrific Assessment
  3. 00:12External Flaws: Stock & Gas Block
  4. 00:24Critical Failure: Headspace & Barrel Grinding
  5. 00:43Receiver Rivet Issues
  6. 00:47Conclusion: A Spectacular Failure

Frequently Asked Questions

What makes the AK build in the video so bad?

The build is considered horrific due to multiple critical failures: the stock latch is missing, the gas block is crudely brazed onto a Dremel-ground barrel, the bolt's locking lugs were ground down unsafely for headspace, and internal receiver rivets were left unfinished, compromising structural integrity.

What specific safety issues were present in the 'Gunsmithing Jackass' AK?

The most dangerous issue was grinding the bolt's locking lugs to achieve headspace, which severely weakens the bolt and risks catastrophic failure. Additionally, improper barrel and receiver assembly compromises the firearm's overall safety and reliability.

What tools were misused in the construction of this AK?

The builder visibly misused a Dremel tool for fitting the barrel and handguard, leaving crude grinding marks. Excessive brazing was also used to attach the gas block, indicating a lack of proper tooling or technique.

What are the key takeaways regarding proper AK assembly from this video?

The video highlights the importance of correct parts installation (like stock latches), proper barrel and gas block alignment, safe headspace procedures (never grinding lugs), and ensuring all receiver rivets are correctly set for structural integrity.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from Forgotten Weapons

View all →