Corrosive Ammo in AK

This guide, based on the expertise of KLAYCO47 with over 10 years of AK experience, outlines 10 critical "don'ts" for AK-47 owners. It emphasizes understanding AK patterns, preserving original parts, checking bore concentricity for suppressor use, and avoiding AR-15 handling habits. The advice aims to help newcomers avoid costly mistakes and maintain their firearms' value and functionality.

This guide details the post-mud test cleaning process for an AK variant, as demonstrated by InRangeTV. The AK's simple design facilitates easy breakdown and cleaning. The process involves using forceful water to remove mud, air drying in a suitable environment, and final lubrication with WD40, highlighting the AK's ease of maintenance after extreme conditions.

This guide details a method for cleaning corrosive ammunition residue from an AK-pattern rifle, specifically an Arsenal SGL 31. The primary cleaning agent is a mixture of Ballistol and water, used to neutralize salts left by corrosive primers. The process involves disassembling the rifle, liberally applying the solution to all parts, and wiping them clean. Specific attention is given to the muzzle brake, gas tube, bolt carrier group, and barrel. The guide also recommends using undiluted Ballistol for tougher fouling and a specific grease for muzzle brake threads to prevent seizing.

Rob Ski from AK Operators Union, Local 47-74 demonstrates a critical cleaning procedure for firearms fired with corrosive ammunition, specifically using the Romanian PSL 54 rifle. He emphasizes the immediate need to flush the rifle with water to dissolve corrosive salts, followed by thorough drying and oiling to prevent rust. This practical guide highlights the importance of understanding ammunition types and their specific maintenance requirements.

This video debunks the myth that worn-out firearm barrels explode, explaining that wear actually reduces pressure resistance. It details common barrel wear points, such as throat erosion affecting accuracy and rifling loss due to corrosive ammo or abrasive cleaning. The presenters emphasize that barrel explosions are not a consequence of normal wear.

This comprehensive guide, presented by AK Operators Union's Rob Ski, details the field stripping and basic maintenance procedures for the AK47 platform. It covers essential steps from initial inspection and disassembly to cleaning, lubrication, and reassembly, emphasizing common AK quirks and best practices for reliability. Rob Ski, a recognized subject matter expert, provides practical advice for both new and experienced AK owners.

This guide details the field stripping and reassembly process for the SVD Dragunov rifle, as demonstrated by an expert from AK Operators Union. It covers removing the dust cover, recoil spring, bolt carrier group, gas tube, and barrel/receiver assembly. The speaker highlights the quality of original components and the rifle's historical significance.

This guide details two critical field expedient repairs for the AK-47 platform, as demonstrated by Rob Ski of AK Operators Union. It covers using rubber bands to temporarily replace a broken recoil spring and guide rod assembly, and employing a wooden toothpick to retain the firing pin when the retainer pin is lost. These techniques are presented as emergency measures to maintain firearm operability in austere environments.

This video details the results of a 5000-round endurance test on the Palmetto State Armory AR15 Freedom, conducted by Rob Ski of AK Operators Union. The rifle successfully completed the rigorous AKOU endurance test, including the sand tornado test. While accuracy was deemed respectable for a budget platform (2.24 MOA), internal inspections revealed normal wear on components like the cam pin and bolt lugs. The rifle is presented as a solid budget option, with a recommendation to invest in a better barrel for enhanced long-range precision.