Magpul Instructions - K2 XL Grip

Published on December 8, 2023
Duration: 1:39

This guide details the installation of the Magpul K2 XL grip onto an AR-15 platform. It covers the necessary tools, the removal of the old grip and detent spring, proper placement of the new grip and spring, and securing it with the provided screw. The process concludes with reinserting the lube bottle and performing a crucial function test.

Quick Summary

To install the Magpul K2 XL grip, you'll need a 3/16 inch hex wrench. Remove the old grip and its detent spring, then place the spring into the K2 XL grip. Mount the new grip onto the lower receiver and hand-tighten the grip screw. Finally, reinsert the lube bottle and perform a function test.

Chapters

  1. 00:05Introduction to K2 XL Grip
  2. 00:08Unboxing and Contents
  3. 00:18Required Tool
  4. 00:25Removing Old Grip Insert
  5. 00:35Step 1: Remove Existing Grip
  6. 00:44Remove Detent Spring
  7. 00:52Place Detent Spring in K2 XL
  8. 01:03Align and Mount K2 XL Grip
  9. 01:08Insert Grip Screw
  10. 01:17Reinsert Lube Bottle
  11. 01:23Final Inspection and Function Test
  12. 01:30Customer Service Information

Frequently Asked Questions

What tools are needed to install the Magpul K2 XL grip?

The only tool required for installing the Magpul K2 XL grip is a 3/16 inch hex wrench. This tool is essential for securing the grip to the lower receiver.

What are the key steps for installing the Magpul K2 XL grip?

The installation involves removing the old grip, transferring the detent spring to the new K2 XL grip, mounting the grip onto the lower receiver, and hand-tightening the grip screw. A final function test is crucial.

Is it important to transfer the detent spring when installing a new AR-15 grip?

Yes, transferring the detent spring is critical. It ensures proper function of the safety selector and trigger group. Ensure it's correctly aligned in the new grip before installation.

What should be done after installing the Magpul K2 XL grip?

After installation, perform a final inspection and a function test. This ensures the grip is securely attached and all firearm controls operate as intended before you take it to the range.

More Tactical & Gear Videos You Might Like

More from Magpul

View all →