This Hack Fixes the BIGGEST Problem With the Nitecore EDC 23 and 27uhi Flashlights

Published on November 8, 2024
Duration: 9:42

This video demonstrates a modification to improve the pocket carry of Nitecore EDC series flashlights, specifically addressing the issue of the stock clip causing too much of the light to protrude. The presenter shows how to replace the factory clip with an aftermarket deep-carry clip, detailing the screw size and the process of swapping the clips. The modification aims to reduce the amount of flashlight hanging out of a pocket, enhancing discreet carry.

Quick Summary

The main problem with Nitecore EDC flashlight pocket clips is excessive protrusion from the pocket. This can be fixed by replacing the stock clip with an aftermarket deep-carry clip. Ensure the new clip has a screw spacing of approximately 8mm center-to-center, and use a T5 Torx bit with a manual screwdriver for the swap.

Chapters

  1. 00:00Introduction: Nitecore EDC Flashlight Clip Problem
  2. 01:13The Biggest Issue: Pocket Clip Protrusion
  3. 02:00Measuring the Screw Spacing
  4. 02:25Introducing the Aftermarket Clip Solution
  5. 03:09Demonstrating the Improved Pocket Carry
  6. 04:06Pros and Cons of the Modification
  7. 05:01What Comes with the Aftermarket Clips
  8. 05:37Tools Needed for the Swap
  9. 06:14The 'First World Problem' Context
  10. 06:33Removing the Original Clip and Plate
  11. 06:50Reinstalling with or Without Protective Plate
  12. 07:52Aesthetic Changes and Functionality
  13. 08:34Pocket Comparison: Modified vs. Original
  14. 09:14Conclusion: Quick Modification for EDC

Frequently Asked Questions

What is the main problem with Nitecore EDC flashlight pocket clips?

The primary issue with the stock pocket clips on Nitecore EDC flashlights, such as the 23 and 27 UHI models, is that they cause a significant portion of the flashlight to hang out of your pocket, making it less discreet and potentially prone to snagging.

How can I fix the Nitecore EDC flashlight pocket clip issue?

You can fix the pocket clip issue by replacing the stock clip with an aftermarket deep-carry pocket clip. This type of clip is designed to hold the flashlight further down in your pocket, reducing the amount that is exposed.

What is the screw spacing for Nitecore EDC flashlight pocket clips?

When measuring from the center of one screw hole to the center of the other on Nitecore EDC flashlights like the 23 and 27 UHI, the spacing is approximately 8mm. This measurement is crucial when selecting an aftermarket clip.

What tools are needed to replace a Nitecore EDC flashlight pocket clip?

To replace the pocket clip on a Nitecore EDC flashlight, you will need a T5 Torx bit. It is highly recommended to use a manual screwdriver to avoid stripping the small screws that come with the aftermarket clip.

More Tactical & Gear Videos You Might Like

More from Marine X

View all →