Videos tagged with DIY Gunsmithing

This guide details the process of fitting and trimming an aftermarket rail intended for a 6-inch barrel Colt Python to a 4-inch barrel model. The primary challenge is the difference in barrel ramp angles, which prevents a flush fit. The process involves cutting the rail to size and applying a finish to the exposed metal.

This video details a comprehensive customization of a Ruger 10/22 Takedown rifle. It covers a multi-stage rattle can paint job on the receiver and stock, installation of performance-enhancing Volquartsen internal parts, and the integration of a specialized Tactical Solutions SBX Takedown barrel. The build also features the Magpul X-22 Takedown stock, highlighting its modularity and storage capabilities, and concludes with the mounting of a Trijicon RMR Type 2 optic.

This guide details the installation of a Cyro backstrap on a Gen 6 Glock, specifically the Glock 19. The process involves removing the factory trigger housing pin and replacing it with an extended steel pin provided with the Cyro backstrap. This modification aims to increase the grip's circumference and improve shooting comfort by adding material to the rear of the frame, addressing the Gen 6's slimmer grip profile. Two versions of the Cyro backstrap are available: one with shock-absorbing rubber and a plain version.

This guide details the installation process for the Magpul ELG Marlin handguard. It covers removing the factory components, preparing the new handguard, selecting the correct clamp, and securely attaching it to Marlin 1894 and 336 models. Proper torque specifications and alignment are emphasized for a safe and effective installation.

This video details a modification process to improve the factory trigger of a Springfield Hellcat pistol. The presenter found the stock trigger to have a heavy pull (6-7 lbs) negatively impacting accuracy and follow-up shots. The modification involves installing a Tyrant Hellcat series trigger and an M-Carbo spring kit, which resulted in a noticeable reduction in trigger pull weight to approximately 4 lbs.

This guide details the installation of the CZ Flyweight trigger mechanism and the replacement of the firing pin on a CZ 457 action. The process involves removing the original trigger and firing pin using specific tools like Allen keys and Torx drivers, then installing the new components. The flyweight firing pin is identifiable by a distinct slot on its front.

This video reviews the Grit Grips G19 frame, highlighting its aggressive texturing, rounded edges for comfort, and ergonomic palm swell. It also notes the flared magazine well and single slot 1913 rail. The presenter discusses the cost-effectiveness of building a Grit Grips lower compared to high-end aftermarket slides.

This video details the installation of the Mars FRT (Force Reset Trigger) into a Ruger 10/22. The presenter, 22 Plinkster, explains that the FRT is not a full-auto sear but a mechanism that resets the trigger as the bolt cycles forward, allowing for a high rate of fire. The installation involves using the factory trigger pack housing and is described as a relatively simple process taking about 10 minutes, with no permanent alterations to the firearm.

This video provides a detailed overview of installing the Atlas Gunworks Alpha conversion grip kit on a Staccato or STI pistol. Roger Barrera from QVO Tactical walks through the process, highlighting the components included and offering advice for DIY enthusiasts. The kit transforms a polymer grip into an all-metal configuration, enhancing ergonomics and performance for competition shooting.

This guide details the installation of the Kiral Defense Heavyweight Steel Backstrap for Glock pistols, specifically the Glock 17 Gen 5. The process involves removing the trigger housing pin, replacing the original backstrap with the steel version, and securing it with a provided steel pin. The upgrade adds approximately 2 ounces to the rear of the firearm, aiming to reduce felt recoil and muzzle flip, thereby improving shooting speed and accuracy. The backstrap also offers a subtle alteration to the grip's shape, which some users prefer for feel.

This guide details the process of building an HK UMP45, focusing on the use of HK parts kits and aftermarket receivers like those from S5 Tactical and GDI 3D. It highlights the benefits of an enhanced recoil spring for suppressed shooting and the ease of installing a pre-assembled drop-in lower receiver. The UMP45 is presented as a viable, albeit often overlooked, platform for home defense due to its manageable recoil, magazine capacity, and suppressed performance.

This video details the installation and tuning process for a Force Reset Trigger (FRT) kit, specifically the 'Secret Sauce Kit' from Squirt Bang Replicate, in a PSA Dagger pistol. The presenter, Jordan of Poor Boy Arms, highlights the need for significant tuning, particularly modifying the 'Terminator' trip profile, to achieve reliable function. Key components include the S8 housing and a 20lb recoil spring. The guide emphasizes proper lubrication and trigger control techniques for optimal performance.