40mm Bofors L/70 Tungsten Armor-Piercing Discarding Sabot Cartridge Disassembly #military #war #tech

Published on January 6, 2024
Duration: 0:34

This video provides a detailed, expert-level disassembly of a 40mm Bofors L/70 Armor-Piercing Discarding Sabot with Tracer (APDS-T) cartridge. The demonstration, conducted with high authority, covers the separation of the projectile from the casing, unscrewing the sabot assembly, and finally extracting the tungsten penetrator from the polymer sabot petals. It highlights the intricate construction of advanced military projectiles.

Quick Summary

The 40mm Bofors L/70 APDS-T cartridge is disassembled by first separating the projectile from the brass casing. The sabot assembly is then unscrewed to reveal the tungsten penetrator, which is subsequently extracted from the polymer sabot petals.

Chapters

  1. 00:00Introduction to 40mm Bofors L/70 APDS-T
  2. 00:08Casing Separation
  3. 00:15Sabot Disassembly
  4. 00:23Tungsten Penetrator Extraction

Frequently Asked Questions

What are the main components of a 40mm Bofors L/70 APDS-T cartridge?

A 40mm Bofors L/70 APDS-T cartridge consists of a brass casing, a sabot assembly, and a tungsten penetrator core. The sabot is typically made of polymer and discards after firing, leaving the heavy penetrator to engage targets.

How is the tungsten penetrator separated from the sabot?

The tungsten penetrator is extracted from the polymer sabot petals after the sabot assembly has been unscrewed from the main cartridge casing. This reveals the individual components of the projectile.

What is the purpose of the sabot in an APDS-T round?

The sabot in an Armor-Piercing Discarding Sabot (APDS) round serves to hold the smaller diameter penetrator within the larger caliber casing. It engages the rifling and is discarded after leaving the barrel, allowing the penetrator to achieve higher velocities.

More Gunsmithing & DIY Videos You Might Like

More from Ordnance

View all →