Colt Addresses Python Issues! (Do I owe Hickok45 and Apology?)

Published on February 25, 2020
Duration: 11:37

This guide details troubleshooting cylinder rotation issues with the Colt Python, as discussed by TheYankeeMarshal. It covers distinguishing user error like 'short stroking' from potential mechanical problems. The guide outlines Colt's findings on light primer strikes from hard primers and loose side plate screws affecting the 'hand', and their recommended solutions including sending the firearm for inspection and potential internal part replacement. The speaker asserts his initial assessment of the issues was correct.

Quick Summary

Colt Python cylinder rotation issues can be caused by user error like 'short stroking' or mechanical problems such as loose side plate screws and light primer strikes from hard-primed ammunition. Colt recommends sending affected firearms for inspection and repair of the internal 'hand', and plans to implement stronger mainsprings for future production.

Chapters

  1. 00:24Colt Python Issues & Hickok45 Controversy
  2. 01:11Demonstrating Short Stroking
  3. 01:21Hickok45's Reaction & Common Practice
  4. 01:53New Info from Field & Stream and Colt
  5. 02:22Field & Stream Article Analysis
  6. 03:07Hickok45's Statements in Article
  7. 04:57Colt's Official Response and Findings
  8. 06:23American Rifleman Article & Colt's Solutions
  9. 08:04Critique of Colt's & Hickok45's Explanations
  10. 09:48Conclusion: The Speaker Was Right

Frequently Asked Questions

What are the common issues discussed regarding the new Colt Python revolvers?

The primary issues discussed are cylinder rotation problems, which can stem from user error like 'short stroking' the trigger. Colt has also identified potential causes such as light primer strikes due to hard-primed ammunition and loose side plate screws affecting the internal 'hand'.

How does 'short stroking' affect a revolver's function?

Short stroking occurs when the trigger of a double-action revolver is not fully released before the hammer is cocked. This prevents the cylinder from rotating to the next chamber, leading to a failure to fire or cycle properly. It is a user error, not a mechanical malfunction.

What is Colt's official stance on Colt Python malfunctions?

Colt's product director denies any widespread malfunction or recall. They have investigated issues, finding that loose side plate screws and light primer strikes from certain imported ammunition are potential causes. They recommend sending affected guns for inspection and repair of the 'hand'.

What solutions does Colt propose for Python issues?

For light primer strikes, Colt plans to use a stronger mainspring and a slightly heavier trigger pull. For cylinder rotation issues, they will inspect and potentially replace the 'hand' and ensure side plate screws are properly torqued, possibly using thread-locking compound.

More Gunsmithing & DIY Videos You Might Like

More from TheYankeeMarshal

View all →