Corrosive Ammo

Published on December 17, 2019
Duration: 3:48

This video demonstrates the critical process of cleaning corrosive ammunition residue from firearms, specifically a PSL 54. It highlights the necessity of using fresh water, preferably warm, to dissolve and flush out corrosive salts immediately after shooting. The demonstration covers disassembling the rifle, flushing the receiver, barrel, and gas system with water, followed by thorough drying and oiling to prevent rust and oxidation.

Quick Summary

To clean corrosive ammo residue, immediately flush your firearm with fresh water, ideally warm, to dissolve the salts. Disassemble the rifle to flush the receiver, barrel, and gas system. Ensure it's completely dry afterward, then apply a light coat of oil to all metal surfaces to prevent rust.

Chapters

  1. 00:00Intro: Why Clean Corrosive Ammo?
  2. 00:42Flushing the Receiver and Barrel
  3. 02:12Cleaning the Gas System
  4. 02:55Drying and Oiling Your Rifle

Frequently Asked Questions

What is the best way to clean corrosive ammunition residue?

The most effective method is to immediately flush the firearm's internals with fresh water, preferably warm, to dissolve the corrosive salts. Follow this with thorough drying and a light coat of oil on all metal surfaces.

Can regular gun solvents remove corrosive salts?

Standard gun cleaning solvents may not be sufficient to remove corrosive salts effectively. Water is the key solvent for these salts because they are water-soluble, unlike many traditional cleaning agents.

What steps are involved in cleaning a PSL 54 after shooting corrosive ammo?

After shooting corrosive ammo in a PSL 54, disassemble it, flush the receiver, barrel, and gas system thoroughly with water. Then, shake out excess water, let it dry completely, and apply a light coat of oil to prevent rust.

Why is drying important after cleaning corrosive ammo with water?

Drying is critical because corrosive salts, once dissolved in water, can still cause rust if left wet. Thoroughly drying the firearm prevents any remaining moisture from reacting with metal parts and causing oxidation.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from AK Operators Union, Local 47-74

View all →