How Hard Is It To Install Woox Furniture?

Published on November 18, 2025
Duration: 2:51

This guide details the installation of Woox furniture, including the handguard and stock, onto a Century Arms AK-47. The process involves removing existing components like the dust cover, bolt, gas tube, and original furniture, followed by fitting and securing the new Woox parts. Minor adjustments may be needed due to AK platform tolerances.

Quick Summary

Installing Woox furniture on an AK-47 typically takes about 45 minutes and requires tools like a screwdriver, hammer, and vice grips. Due to potential tolerance variations in AK platforms, minor fitting adjustments may be necessary for optimal installation.

Chapters

  1. 00:00Introduction to Woox Furniture Installation
  2. 00:13Firearm and Furniture Overview
  3. 00:25Tools Required for Installation
  4. 00:31AK-47 Disassembly: Dust Cover and Bolt Removal
  5. 00:38Gas Tube Removal
  6. 00:48Original Handguard Removal
  7. 01:03Original Stock Removal
  8. 01:24Woox Gas Tube Guard Installation
  9. 01:34Woox Handguard Installation
  10. 01:56Upper Gas Tube and Lever Installation
  11. 02:01Rear Stock Adapter Installation
  12. 02:05Woox Stock Installation
  13. 02:29Final Reassembly Steps
  14. 02:32Finished Woox AK-47
  15. 02:37Conclusion and Installation Difficulty

Frequently Asked Questions

What tools are needed to install Woox furniture on an AK-47?

For installing Woox furniture on an AK-47, you will typically need a screwdriver, a rubber mallet (optional), a vice grip wrench, and a hammer. These tools are used for disassembly and fitting the new furniture components.

How long does it typically take to install Woox furniture on an AK-47?

The video suggests that installing Woox furniture on an AK-47 can take approximately 45 minutes. This timeframe accounts for the disassembly of the original parts and the fitting of the new Woox components.

Are there any special considerations when installing Woox furniture on an AK-47?

Yes, AK-47 platforms can have slightly different tolerances. This means you might need to make minor adjustments, such as carving a bit of the interior wood, or use extra tools to ensure a proper fit for the Woox handguard.

What are the basic steps for installing Woox furniture on an AK-47?

The process involves removing the dust cover, bolt, and gas tube. Then, you'll remove the original handguard and stock. Finally, you'll install the Woox gas tube guard, handguard, rear adapter, and stock, reassembling the firearm afterward.

More Gunsmithing & DIY Videos You Might Like

More from Civilian Tactical

View all →