How To Clean And Lubricate A Caracal Pistol (HD)

Published on June 20, 2013
Duration: 12:47

This guide details the field stripping, cleaning, and lubrication process for Caracal pistols, applicable to both C and F models, following the manufacturer's manual. It emphasizes using specific tools like CLP, dental picks, and a toothbrush, while highlighting the importance of angling the slide muzzle-down to protect the firing pin channel. The video also covers recommended lubrication points on the rails, barrel, and slide.

Quick Summary

To clean a Caracal pistol, field strip it by removing the slide, recoil spring, and barrel. Use CLP with tools like a toothbrush and dental picks to clean the slide, barrel, and frame, paying attention to the rails and breach face. Angle the slide muzzle-down to protect the firing pin channel. Lubricate the rails, barrel, and slide lock-up points.

Chapters

  1. 00:15Introduction and Tools
  2. 00:26Field Stripping the Caracal Pistol
  3. 02:27Cleaning the Slide
  4. 03:24Cleaning the Barrel
  5. 04:27Cleaning the Frame
  6. 05:07Cleaning the Recoil Spring and Barrel Exterior
  7. 06:28Detailed Cleaning of Slide Rails and Breach Face
  8. 07:09Cleaning Under the Extractor Hook
  9. 08:21Detailed Cleaning of Frame Rails
  10. 10:08Lubrication Process
  11. 11:15Reassembly and Function Check
  12. 12:10Conclusion and Q&A

Frequently Asked Questions

What are the essential tools for cleaning a Caracal pistol?

Essential tools include an old toothbrush for scrubbing, polymer dental picks for tight areas, a polymer cleaning rod, and t-shirt scraps or gun patches for wiping. CLP (Cleaning, Lubricant, Protectant) is the recommended cleaning solution.

How do you properly field strip a Caracal pistol for cleaning?

To field strip, remove the magazine, clear the chamber, decock the pistol, pull the slide back slightly, engage the disassembly tabs, and slide the assembly off the frame. Then remove the recoil spring and barrel.

Where should I apply lubricant on a Caracal pistol?

Lubricate the rails on both the slide and frame, the barrel, and where the barrel locks into the slide. The manual suggests a slight layer on all metal surfaces and down the length of the rails.

What cleaning solutions are recommended for a Caracal pistol?

CLP (Cleaning, Lubricant, Protectant) is highly recommended. Other effective options include Break-Free, Frog Lube, Slip 2000, and Hoppe's Elite. Avoid REM Oil and WD-40.

More Gunsmithing & DIY Videos You Might Like

More from Mrgunsngear Channel

View all →