My Remington Model 11 Broke! (Mag Tube Replacement Video)

Published on May 4, 2024
Duration: 26:31

This video details the process of replacing a broken magazine tube on a Remington Model 11 shotgun. The presenter demonstrates how to remove the old tube, clean the receiver, and install a new, period-correct original magazine tube sourced from eBay. The guide also covers the removal of the two-shot hunting plug to increase magazine capacity and the reassembly of the shotgun's action.

Quick Summary

The magazine tube on a Remington Model 11 can break at the threads due to repeated stress from extensive use. Replacement involves removing the set screw and retaining ring, then carefully unscrewing the old tube, often with a pipe wrench. A new tube is then threaded in and secured with a set screw. Removing the two-shot plug can increase capacity.

Chapters

  1. 00:05Introduction to the Gunsmith Shop
  2. 00:44Remington Model 11 Magazine Tube Failure
  3. 01:46Sourcing an Original Magazine Tube
  4. 03:38Unboxing the Original Part
  5. 05:23Disassembly: Removing the Old Tube
  6. 08:38Cleaning the Receiver Threads
  7. 08:53Installing the New Magazine Tube
  8. 11:21Securing the New Tube with Set Screw
  9. 13:37Installing the Second Set Screw
  10. 15:29Identifying Broken Part and Future Plans
  11. 16:19Removing the Magazine Plug
  12. 18:55Reassembly: Follower, Spring, Cap
  13. 22:28Reassembly: Recoil Assembly and Barrel
  14. 24:44Testing the Repaired Remington Model 11
  15. 25:37Conclusion and Thanks

Frequently Asked Questions

What causes the magazine tube on a Remington Model 11 to break?

The magazine tube on a Remington Model 11 can break at the threads, particularly where the plug screws on, due to repeated stress from extensive use over many years. This stress riser combined with friction can lead to failure.

Where can I find original parts for an older Remington Model 11 shotgun?

Original parts for older firearms like the Remington Model 11 can often be found on online marketplaces such as eBay. The video shows the successful acquisition of an original, period-correct magazine tube from eBay.

How do you remove a broken magazine tube from a Remington Model 11?

To remove a broken magazine tube, first remove the set screw and retaining ring. If the tube is stuck, a pipe wrench can be used carefully to break it loose, ensuring not to damage the receiver threads.

Can I increase the magazine capacity of a Remington Model 11?

Yes, you can increase the magazine capacity by removing the two-shot hunting plug, which is typically installed to limit rounds for hunting regulations. This allows the shotgun to hold more rounds in the magazine tube.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from Autumn's Armory

View all →