Repairing a Remington Model 11 Gunstock | Remington Model 11 Shotgun Project

This video demonstrates the advanced gunsmithing technique of rejoining loose shotgun barrels, often referred to as 'putting barrels back on face.' It details the process of adding weld material to the barrel lug's hook, followed by precise filing and fitting using a 0.005-inch feeler gauge and kerosene smoking for accuracy. The goal is to restore a tight lock-up for classic double-barrel shotguns like Parker Brothers.

This video demonstrates a professional method for repairing cracked wooden gunstocks, specifically on a Remington Model 11. It emphasizes thorough preparation, including stripping finishes and removing oil saturation with acetone, before applying a waterproof polyurethane glue. Techniques for forcing glue into deep cracks and wicking it into surface fissures are shown, along with using surgical tubing for effective clamping.

This video discusses the repair of an "over/under stock" on a firearm that has endured over 35,000 rounds. The creator emphasizes that this is not a tutorial and warns against attempting the repair without the necessary expertise. A link to another video showcasing a "chipped toe repair" is also provided. The video aims to share maintenance procedures for a heavily used firearm.

This video details the 'rejoining' process for loose British side-by-side shotguns, specifically addressing the 'off the face' condition. It demonstrates how to diagnose looseness using smoke and then meticulously refit the barrels to the receiver by replacing the hinge pin with an oversized one. The process involves reaming the receiver, fitting a new pin, and carefully filing the barrel hook and breech face for a tight, precise fit.

This video provides a detailed, step-by-step guide to disassembling a Spanish AYA sidelock side-by-side shotgun, presented by gunsmith Jack Rowe. It covers the removal of various pins, the action from the stock, and the internal components of the sidelock mechanism, including cocking levers, springs, and sears. The demonstration highlights key differences in design compared to English sidelocks and emphasizes the importance of careful handling of small parts.

This video demonstrates the process of 'striping' the breech face of a British side-by-side shotgun. The technique is presented as a method to enhance the aesthetic appearance of the firearm. The video features Jack Rowe and Larry Potterfield, founder and CEO of MidwayUSA, working on an older English double shotgun. It highlights a specific gunsmithing technique for classic firearms and directs viewers to the MidwayUSA Video Library for more content.

This video showcases advanced Cowboy Action Shooting techniques demonstrated by The Lever Action Kid. It highlights rapid engagement with a lever-action rifle, followed by a high-speed transition to dual single-action revolvers. The stage concludes with efficient manual reloading of a side-by-side shotgun.

This video provides an in-depth look at the Mosin-Nagant M91/30 PU Sniper rifle, showcasing its historical significance and operational features. It details the firearm inspection, loading procedures for 7.62x54R rounds, and a live-fire demonstration. The expert handling and clear visuals highlight the rifle's characteristics and performance.

This video details the complex gunsmithing process of reboring a Winchester 1885 Low Wall rifle from a pitted .32 Rimfire to a .357 Magnum. It covers barrel removal, sending it to a specialized shop for reboring and rifling, precise chambering and crowning on a lathe, and converting the action from rimfire to centerfire. The process concludes with barrel marking and finishing.

This video details the internal mechanics and cycle of operation for the Winchester Model 12 pump-action shotgun using a cutaway model. It explains the loading process into the magazine tube, the function of the safety mechanism, and the sequence of firing, extraction, and chambering. The demonstration highlights the hammerless design and the interaction of key components like the extractor and ejector.