P211 Disassembly and Barrel Block Installation

Published on February 3, 2026
Duration: 5:39

This expert guide from SIG SAUER demonstrates the step-by-step disassembly of the P211 pistol and the installation of the new barrel block accessory. It covers safety checks, component removal and reassembly, tool specifications, torque values, and recoil spring options, emphasizing the benefits of the barrel block for competition use. The instruction is delivered with clear, authoritative expertise.

Quick Summary

The SIG SAUER P211 pistol disassembly involves removing the slide catch lever, then the slide components including the recoil guide, spring, and plug, followed by the barrel. Reassembly requires careful attention to torque specifications for the barrel block screw (15 inch-pounds) and proper seating of components.

Chapters

  1. 00:00Introduction P211 Disassembly
  2. 00:07Safety Check
  3. 00:18Remove Slide Catch Lever
  4. 00:39Disassemble Slide Components
  5. 01:01Mock 3D Compensator Overview
  6. 01:14Remove Compensator
  7. 01:50Detach Compensator from Barrel
  8. 01:58Install New Barrel Block
  9. 02:24Install Wedge and Spring
  10. 02:42Install and Torque Barrel Block Screw
  11. 03:19Barrel Block Benefits
  12. 03:25Recoil Spring Options
  13. 03:45Install Recoil Spring on Guide Rod
  14. 03:52Reassemble Slide with Barrel Block
  15. 04:32Install Recoil Guide Rod Assembly
  16. 04:54Metal Recoil Plug Warranty
  17. 05:05Reassemble Slide to Frame
  18. 05:28Final Function Check

Frequently Asked Questions

How do you disassemble the SIG SAUER P211 pistol?

Begin by ensuring the P211 is unloaded. Remove the slide catch lever, then disassemble the slide components by removing the recoil guide, spring, and recoil plug. Finally, remove the barrel from the slide. Reassembly follows in reverse order.

What tools are needed to install the P211 barrel block?

Installation of the P211 barrel block requires a 5/64 inch hex tool for the retaining screw. A 1/16 inch punch may also be necessary if the wedge pin is carbon-locked and needs to be removed.

What are the benefits of the P211 barrel block accessory?

The P211 barrel block accessory is designed to offer more options for competition use. It provides a stable platform for recoil management and can be paired with specific recoil springs for optimized performance in competitive shooting scenarios.

What is the torque specification for the P211 barrel block screw?

The screw for the P211 barrel block must be torqued to 15 inch-pounds. It's crucial not to overtighten this screw to prevent damage to the components or the firearm.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from SIG SAUER, Inc

View all →