Self Indexing Compensator Installation

Published on February 23, 2021
Duration: 1:47

This guide details the installation of a self-indexing compensator on a Springfield Armory Hellcat pistol. It emphasizes critical safety procedures, including ensuring the firearm is unloaded before starting. The process involves removing the slide, manipulating a locking lever, threading the compensator, and aligning it for a secure fit. Finally, it covers reassembly and function checks.

Quick Summary

To install a Springfield Hellcat self-indexing compensator, first ensure the firearm is unloaded and the slide is removed. Depress the locking lever, thread the compensator on, then reverse slightly. Re-thread forward, then reverse until aligned and it clicks. Finally, reassemble and function check.

Chapters

  1. 00:00Safety Warnings & Unloading
  2. 00:12Hellcat with Compensator Overview
  3. 00:19Compensator Removal Procedure
  4. 00:25Locking Lever Close-up
  5. 00:40Compensator Installation Steps
  6. 00:59Slide Markings (HELLCAT, 9x19)
  7. 01:03Indexing and Locking Mechanism
  8. 01:19Visual Alignment and Click
  9. 01:27Final Assembly and Function Check

Frequently Asked Questions

What is the first step before installing a compensator on a Springfield Hellcat?

Before attempting any installation, always ensure the firearm is completely unloaded. Remove the magazine and visually confirm the chamber is clear. Never work on the firearm with the slide assembly attached to the frame.

How do you properly install the self-indexing compensator on a Hellcat?

After removing the slide, depress the locking lever, screw the compensator onto the threaded barrel until it stops, then rotate it back a half turn. Depress the lever again, thread forward until it stops, then reverse until aligned and it clicks.

What ensures the compensator is securely locked in place?

The compensator is securely locked when you hear an audible click as you rotate it in reverse until it aligns with the top of the slide. The port on top should also face upwards.

What is the final step after installing the compensator?

After reinstalling the slide assembly onto the frame, you must perform a function check. Cycle the slide several times to verify proper operation and ensure the entire system is functioning correctly and safely.

Related News

All News →

More Gunsmithing & DIY Videos You Might Like

More from SPRINGFIELD ARMORY

View all →