STI 2011 Field Strip: Featuring the Taran Tactical "Combat Master"

Published on January 21, 2020
Duration: 6:30

This guide details the field strip and reassembly process for an STI 2011 "Combat Master," chambered in 9mm. It highlights similarities to the 1911 platform but notes differences in the guide rod assembly, which requires a specific hinged mechanism for removal and installation. The process is demonstrated for basic cleaning and lubrication purposes.

Quick Summary

The STI 2011 "Combat Master" field strip involves removing the takedown pin after aligning the slide notch, separating the slide from the frame, and then disengaging a unique hinged guide rod assembly to remove the recoil spring and guide rod before taking out the barrel.

Chapters

  1. 00:00Introduction & Firearm Identification
  2. 00:18Safety Check & Magazine Removal
  3. 00:42Slide Removal (Takedown Pin)
  4. 01:29Guide Rod & Recoil Spring Assembly Removal
  5. 02:11Barrel Removal
  6. 02:54Reassembly: Barrel & Guide Rod
  7. 03:35Reassembly: Slide & Takedown Pin
  8. 04:27Final Check & Function Test
  9. 04:33Bonus Firearm: Beaubourg Arms XR9-L

Frequently Asked Questions

How do you field strip an STI 2011 "Combat Master"?

To field strip the STI 2011 "Combat Master," first ensure it's unloaded. Pull the slide back to the disassembly notch, remove the takedown pin, and separate the slide from the frame. Then, depress the guide rod forward, engage its cutout to hinge open the front, and remove the guide rod and spring. Finally, remove the barrel from the slide.

What makes the STI 2011 "Combat Master" guide rod removal unique?

Unlike a traditional 1911, the STI 2011 "Combat Master" features a guide rod assembly that requires a specific hinged mechanism. You must push the guide rod fully forward, then depress a cutout on it to hinge the front section open, allowing for removal of the guide rod and recoil spring.

What caliber is the STI 2011 "Combat Master" shown in the video?

The STI 2011 "Combat Master" featured in the video is chambered in 9mm. The presenter specifically mentions it can handle both 9mm Luger and 9mm Major ammunition.

More Gunsmithing & DIY Videos You Might Like

More from Arm&Gun

View all →