TA Targets A-DAP 2.0 Conversion | The best AR550 Steel target made even better

Published on March 16, 2020
Duration: 12:05

This guide details the process of converting older TA Targets A-DAP steel target plates to the new 2.0 bracket system. The video demonstrates how to remove old hardware, inspect the target plate for wear and tear, and install the new brackets, emphasizing the importance of washers for plate resonance and the benefits of the 2.0 system for adjustability and target longevity. It covers conversions for Mini A-DAP and C-Zone/Goliath plates.

Quick Summary

Upgrade your TA Targets A-DAP steel target plates to the 2.0 bracket system for enhanced versatility and target longevity. The process involves removing old hardware, inspecting the plate for damage, and installing new 2.0 brackets with provided hardware, ensuring washers are used for proper resonance. The 2.0 system's adjustable forward lean angle helps manage fragmentation and extends plate life.

Chapters

  1. 00:00Introduction to A-DAP 2.0 Conversion
  2. 00:12Understanding 2.0 Brackets (Short & Long)
  3. 00:33Tools and Hardware Needed
  4. 01:08Converting the Mini A-DAP
  5. 01:36Inspecting the Target Plate
  6. 03:44Installing New Angles on Mini A-DAP
  7. 04:13Critical Bracket Tightening
  8. 05:21Reassembling Top Bracket
  9. 06:21Converting the C-Zone/Goliath Plate
  10. 07:00Importance of Washers
  11. 07:34Long Bracket Hole Usage
  12. 08:13Checking Pin Fitment for C-Zone
  13. 08:42Armored Post Recommendation
  14. 09:13Routine Maintenance Benefits
  15. 09:40Why Upgrade to 2.0 Brackets?
  16. 10:01Benefits of Forward Lean Angle
  17. 10:33Installation Summary & Call to Action

Frequently Asked Questions

How do I convert an older TA Targets A-DAP steel target plate to the new 2.0 bracket system?

To convert your older TA Targets A-DAP plate, you'll need to remove the old angles, inspect the plate for damage, and then install the new 2.0 brackets using the provided hardware. Ensure you retain the washers between the bracket and the plate for proper resonance. The process is straightforward and takes only a few minutes per plate.

What are the benefits of upgrading to TA Targets' 2.0 brackets?

The 2.0 brackets offer enhanced versatility with adjustable forward lean angles. This feature allows for closer engagement distances and helps direct fragmentation downwards, significantly increasing the target plate's lifespan, even under heavy use with calibers like 5.56 NATO.

How should I inspect my steel target plate for damage before conversion?

Inspect your steel target plate for cracks, significant pitting (larger than 3/16 inch wide and palpable), or excessive curvature (over 1/8 to 1/4 inch). Minor edge chipping is normal. If significant damage is found, flip the plate to the unused side or consider replacement.

Why are washers important when installing TA Targets brackets?

Washers are essential as they create a small gap between the steel bracket and the target plate. This spacing allows the plate to resonate freely when struck, producing the characteristic 'ring' sound. Without them, the sound would be dampened.

More Gunsmithing & DIY Videos You Might Like

More from TA Targets

View all →