Wilson Combat - Hammer Spring Replacement

This guide details the process of replacing the mainspring on a Swiss Luger 1900. It covers identifying a failed mainspring, the correct direction for removal, manipulating the grip safety, compressing and installing the new spring with safety precautions, and reassembly. The new spring is noted to be significantly stiffer, requiring a specific operational technique for this model.

This guide details the simplified field stripping process for the Laugo Arms Remus pistol, as demonstrated by an expert from Forgotten Weapons. The Remus utilizes a new disassembly lever, eliminating the need for tools or pins required by the original Alien model. This process is crucial for routine cleaning and maintenance.

This expert-level guide provides a detailed, step-by-step walkthrough for reassembling the Ruger 10/22 Rifle, presented by an instructor from Ruger Firearms. It covers safety precautions, component reinstallation, and crucial function checks, emphasizing the use of specific tools like a 5/32" Allen key and a small punch. The instruction is clear and authoritative, suitable for intermediate skill levels.

This guide details the disassembly process for the gas trap variant of the M1 Garand, highlighting its differences from the later, more common models. It involves removing the bolt and operating rod first, then a specific screw to release the gas trap, followed by the sight block, before the gas trap assembly can be rotated off. This early design proved less reliable than the later gas piston system.

This guide details the process of lapping an AR-15 receiver to ensure proper barrel alignment for improved long-range accuracy. Instructor Stephen Caleb from Brownells explains that receiver faces can be slightly out of alignment, leading to barrel runout. The process involves using a specialized lapping fixture and aluminum oxide lapping compound with a drill to create a perfectly flat receiver face. This ensures the barrel seats flush and square, critical for precision shooting beyond 500 yards.

This video provides a step-by-step guide on installing the Recoil Reaper hydraulic buffer from Jacob Gray into a 2011 pistol. The installation process involves disassembling the firearm, removing the original guide rod and spring, and then carefully reassembling with the new hydraulic buffer and the OEM recoil spring. The presenter notes the potential for a 20-30% recoil reduction and demonstrates a function check post-installation.

This guide details the dangers of 'thumbing the hammer down' on a loaded firearm, a technique strongly advised against by experts. It emphasizes that this action, which involves pulling the trigger while manually lowering the hammer, carries a high risk of accidental discharge if the thumb slips. The expert instruction highlights safer alternatives like engaging the manual safety for 'cocked and locked' carry or clearing the chamber entirely.

This guide details the advanced technique of hand stippling a 1911 firearm frame for enhanced grip, as demonstrated by a master gunsmith. It covers the precise application of texture using a punch and hammer, followed by meticulous filing to refine the edges. This process requires significant skill and attention to detail for a professional finish.

This guide details the proper technique for cycling the slide on a semi-automatic pistol, specifically the 1911, as explained by Ken Hackathorn. It emphasizes avoiding "gun abuse" by not slamming the slide on an empty chamber, which can cause premature wear. The explanation includes the mechanical reasons behind this, focusing on how the cartridge rim stabilizes the extractor and cushions the slide's action.

Massad Ayoob, a renowned firearms instructor and legal expert, details the critical post-Defensive Gun Use (DGU) protocol. He emphasizes that the most common mistake is failing to immediately call 911 after a DGU, even if no shots were fired. This action is crucial for establishing oneself as the victim complainant in the ensuing legal aftermath.