Wilson Combat - Spec Ops 9 Disassembly

This video provides a clear, step-by-step guide on how to field strip and reassemble the Browning Hi-Power pistol. It highlights key differences from the 1911 design, such as its linkless barrel system, and emphasizes safety precautions throughout the process. The demonstration covers magazine removal, chamber checks, slide stop manipulation, spring and barrel removal, and the reverse process for reassembly.

This expert guide details the step-by-step cleaning and maintenance procedure for the Ruger Red Label III Over/Under Shotgun, as demonstrated by a Ruger firearms instructor. It covers complete disassembly, thorough cleaning of all components including the bore and choke tubes, proper lubrication techniques, and safe reassembly, emphasizing critical safety precautions throughout.

This guide details the field stripping and reassembly process for the Browning Model 1910 pistol. It covers the unique barrel bushing removal mechanism, recoil spring assembly, and the steps to separate and rejoin the slide, barrel, and frame. The process highlights the pistol's blowback design and John Browning's engineering.

This guide details the disassembly and reassembly process for the integral suppressor on the Tippmann Arms M4-22 Elite Bugout ISS pistol. It covers removing the handguard and suppressor components, cleaning and lubricating the parts, and reassembling the system. The process emphasizes proper tool usage and safety precautions for maintaining the firearm's suppressor system.

This guide details the disassembly and internal inspection of the Ruger American Pistol, focusing on identifying a potential guide rod and recoil spring issue. The speaker, an experienced firearm instructor, walks through the process after the pistol experienced a complete lock-up during firing. The inspection reveals the main spring had hopped over the guide rod, causing the malfunction.

This video details the cleaning and maintenance of an HK SP5K after approximately 8,000 rounds, with 90% of them suppressed. The speaker demonstrates a surprisingly simple field strip process, highlighting the roller-lock system's efficiency in preventing excessive fouling. The guide covers removing the stock, bolt carrier group, and cleaning components, noting the minimal buildup despite high round count and suppressor use.

This guide details the dangers of 'thumbing the hammer down' on a loaded firearm, a technique strongly advised against by experts. It emphasizes that this action, which involves pulling the trigger while manually lowering the hammer, carries a high risk of accidental discharge if the thumb slips. The expert instruction highlights safer alternatives like engaging the manual safety for 'cocked and locked' carry or clearing the chamber entirely.

This guide details the advanced technique of hand stippling a 1911 firearm frame for enhanced grip, as demonstrated by a master gunsmith. It covers the precise application of texture using a punch and hammer, followed by meticulous filing to refine the edges. This process requires significant skill and attention to detail for a professional finish.

This guide details the proper technique for cycling the slide on a semi-automatic pistol, specifically the 1911, as explained by Ken Hackathorn. It emphasizes avoiding "gun abuse" by not slamming the slide on an empty chamber, which can cause premature wear. The explanation includes the mechanical reasons behind this, focusing on how the cartridge rim stabilizes the extractor and cushions the slide's action.

Massad Ayoob, a renowned firearms instructor and legal expert, details the critical post-Defensive Gun Use (DGU) protocol. He emphasizes that the most common mistake is failing to immediately call 911 after a DGU, even if no shots were fired. This action is crucial for establishing oneself as the victim complainant in the ensuing legal aftermath.