WORST AK SHOTGUN - Chinese Saiga 12

Published on August 27, 2021
Duration: 15:44

This guide details the disassembly of the JTS 12-gauge shotgun, focusing on component inspection as demonstrated by Brandon Herrera. It highlights critical areas such as the cast bolt, receiver features, and gas system. The information is presented from the perspective of an experienced AK-platform expert, offering insights into the manufacturing quality and potential reliability issues of this Chinese-made firearm.

Quick Summary

The JTS 12-gauge shotgun, a Chinese-made AK-pattern import, is critically reviewed by AK-expert Brandon Herrera. It suffers from severe reliability issues like double feeds and magazine problems, poor accuracy with a significant low point-of-impact, and low-quality cast components, making it a poor performer compared to the Saiga 12 and Vepr 12.

Chapters

  1. 00:00Introduction to JTS 12
  2. 01:00Shooting and Malfunctions
  3. 03:47Internal Features and Disassembly
  4. 05:00Technical Critique of Components
  5. 08:13Receiver and Gas System
  6. 10:00Accuracy and Energy Tests
  7. 14:35Conclusion

Frequently Asked Questions

What are the main reliability issues with the JTS 12 shotgun?

The JTS 12 shotgun commonly experiences double-feed malfunctions and difficulties in seating the magazine properly. These issues stem from potential problems with the magazine well, bolt tolerances, or overall receiver construction, significantly impacting its operational reliability.

How does the JTS 12 compare to the Saiga 12 or Vepr 12?

The JTS 12 is considered a budget version and significantly underperforms compared to the Saiga 12 and Vepr 12. It suffers from lower-quality cast components, poor reliability, and accuracy issues, making it an inferior choice despite potential cost savings.

What are the key internal components to inspect on the JTS 12?

When inspecting the JTS 12, pay close attention to the cast bolt and bolt carrier for machining quality. Also, examine the recoil spring assembly and the 4-position gas regulator, noting any signs of wear or improper function.

What accuracy problems were observed with the JTS 12 shotgun?

During testing, the JTS 12 exhibited a significant point-of-impact shift, shooting considerably low even at close range (5 yards). This indicates serious accuracy deficiencies, likely due to design flaws or poor manufacturing tolerances.

More Gunsmithing & DIY Videos You Might Like

More from Brandon Herrera

View all →