.308 Win - 110gr Hornady Z-Max with Reloder 7

Published on March 13, 2017
Duration: 28:41

This video details a .308 Winchester reloading experiment using 110gr Hornady Z-Max bullets and Alliant Reloder 7 powder. The test evaluated Starline brass performance across two rifles, a Tikka T3 Lite and a Savage Model 99, with velocities ranging from 2875 to over 3170 fps. The Tikka achieved a best group of 1.5 inches, while the Savage struggled with groups up to 4.2 inches, highlighting rifle-specific performance variations.

Quick Summary

This .308 Winchester reloading test used 110gr Hornady Z-Max bullets and Alliant Reloder 7 powder. The Tikka T3 Lite achieved a best group of 1.5 inches, while the Savage Model 99 produced groups up to 4.2 inches. Observed velocities ranged from 2875 fps to over 3170 fps.

Chapters

  1. 00:00Introduction & Brass Selection
  2. 00:43Bullet & Powder Choice: 110gr Z-Max & Reloder 7
  3. 01:32Load Data: OAL, Primers, Charge Weights
  4. 05:34Bullet Seating Process with Forster Die
  5. 09:27Range Testing Setup: Tikka & Savage Rifles
  6. 10:21Live Fire Results & Velocity Data
  7. 22:53Accuracy Analysis: Tikka vs. Savage Performance
  8. 25:13Technical Issue: Seating Die Compatibility

Frequently Asked Questions

What bullet and powder were used in this .308 Winchester reloading test?

The test utilized 110-grain Hornady Z-Max bullets, which are designed for varmint hunting, and Alliant Reloder 7 powder, a faster-burning powder often seen in .300 Blackout loads.

What were the key accuracy results for the Tikka and Savage rifles?

The Tikka T3 Lite performed significantly better, achieving its best group at 1.5 inches with the highest charge weight. The Savage Model 99 struggled, producing groups that opened up to 4.2 inches at higher charges.

What was the observed velocity range for the tested .308 Win loads?

Velocities ranged from approximately 2875 feet per second (fps) with the lower charge weights up to over 3170 fps with the maximum charge of Reloder 7.

Were there any equipment compatibility issues encountered during reloading?

Yes, a Redding seating die was found to be incompatible because it bottomed out and began crimping before reaching the required 2.740-inch overall length for this specific short bullet.

Related News

All News →

More Range & Competition Videos You Might Like

More from Johnny's Reloading Bench

View all →