Avidity Arms PD10 Tabletop Review and Field Strip

Published on February 4, 2023
Duration: 19:55

This video provides a detailed tabletop review and field strip of the Avidity Arms PD10, a 9mm single-stack pistol designed by firearms instructor Rob Pincus. The review covers unboxing, manual inspection, fit and finish, features, and a complete field strip. The PD10 is highlighted for its slim profile, 4-inch barrel for optimal ballistics, and comfortable ergonomics for concealed carry and training.

Quick Summary

The Avidity Arms PD10 is a 9mm single-stack pistol designed by firearms instructor Rob Pincus, emphasizing practical experience. It features a 4-inch barrel for optimal ammunition performance, a slim profile for concealed carry, and AmeriGlo 'Claw' sights for enhanced manipulation. The frame is also designed to be 3D printable.

Chapters

  1. 00:00Introduction: Avidity Arms PD10 Arrives
  2. 00:21Design Philosophy: Instructor-Driven
  3. 00:45Rob Pincus's Experience and Vision
  4. 01:37Holsters Available at Launch
  5. 01:55Manual Review and Key Information
  6. 02:48Ammunition: Plus P Rated
  7. 03:39Gun Pro Principles Explained
  8. 04:05What's Included in the Box
  9. 04:24The PD10: Specs and Features
  10. 04:49Pincus's Theory on Carry Gun Compromises
  11. 05:15The 4-Inch Barrel Advantage
  12. 06:11Single Stack Width and Capacity
  13. 06:33Comfort and Grip of Single Stacks
  14. 07:02Training with Your Carry Gun
  15. 08:07Tabletop Look: Magazine Release
  16. 09:00Slide Lock Operation
  17. 09:25Front of the Gun: Barrel and Rails
  18. 10:15Frame Details: Texture and Support
  19. 10:28Trigger Guard and Magazine Release
  20. 10:49Grip Texturing Analysis
  21. 11:11Magazine Well and Back Strap
  22. 11:25Slide to Frame Fit
  23. 11:39Sight Picture: AmeriGlo Claw Sights
  24. 12:15Rear Slide Serrations
  25. 12:34Loaded Chamber Indicator
  26. 12:56Field Stripping the PD10
  27. 13:18Inside the Frame: Rails and Pins
  28. 14:013D Printable Frame Files
  29. 14:26Rob Pincus's Mission: Gun in Every State
  30. 14:42Recoil Assembly Details
  31. 15:05Barrel Removal: Browning Locking Action
  32. 15:14Inside the Slide: Safety Plunger and Striker
  33. 15:24Barrel Inspection: Feed Ramp
  34. 15:34Chamber Support Test Setup
  35. 16:05Chamber Support Results
  36. 16:56Reassembly and Function Check
  37. 17:01Upcoming Range Video Preview
  38. 17:17Post-Reassembly Function Check
  39. 17:25Planned Range Tests: Full Mag +1
  40. 17:56Planned Range Tests: What's for Dinner?
  41. 18:07Planned Range Tests: Spinner Target
  42. 18:19Planned Range Tests: Practical Accuracy
  43. 18:33Trigger Talk Section
  44. 18:40Trigger Blade Safety and Feel
  45. 19:01Trigger Reset Analysis
  46. 19:07Trigger Assessment: Defensive vs. Competition
  47. 19:26Trigger Impact on Front Sight
  48. 19:34Conclusion: Tabletop Review
  49. 19:39Next Steps: Shooting Impressions Video

Frequently Asked Questions

What makes the Avidity Arms PD10 unique in its design?

The Avidity Arms PD10 stands out because it was designed by actual firearms instructor Rob Pincus, drawing directly from his extensive experience in training and observing how people use firearms in real-world scenarios.

What are the key specifications of the Avidity Arms PD10?

The PD10 is a 10+1 round, single-stack 9mm pistol featuring a 4-inch barrel, which is optimal for ammunition performance. It measures approximately 0.8 to 0.9 inches wide, making it very slim for concealed carry.

What type of sights does the Avidity Arms PD10 come with?

The PD10 is equipped with AmeriGlo 'Claw' sights. These feature a bright tritium front sight for low-light conditions and a blocked-out rear sight designed for easy one-handed manipulation and snagging on surfaces.

Can the frame of the Avidity Arms PD10 be 3D printed?

Yes, the 3D files for the PD10 frame are available online, allowing users with 3D printers to create or modify their own frames and then complete the firearm with parts purchased from Avidity Arms.

How does the PD10's 4-inch barrel benefit its performance?

A 4-inch barrel is considered the SAAMI standard for 9mm ammunition testing. This length ensures that the bullet achieves sufficient velocity for proper expansion and performance, unlike shorter barrels found on some micro-compacts.

Related News

All News →

More Reviews Videos You Might Like

More from GBGuns

View all →