"Cheap" 7.62x39 Krink? First 500 Round Review. Riley defense.

Published on March 24, 2024
Duration: 19:03

This review details the first 500 rounds fired through a Riley Defense AK-47 Krinkov-style rifle chambered in 7.62x39. The assessment covers initial impressions, performance with various magazines and ammunition types, and the impact of suppressor use. The reviewer notes initial malfunctions that seemed to resolve as the rifle broke in, and observes minor metal movement on internal components after the 500-round test.

Quick Summary

The Riley Defense 7.62x39 Krinkov-style rifle experienced some initial malfunctions, including failures to extract, but seemed to break in and improve performance over the first 500 rounds. Suppressor use reduced felt recoil, though the suppressor itself loosened during firing. Minor internal metal movement was observed, typical for AK break-in.

Chapters

  1. 00:00Introduction & First Shots
  2. 00:30Rifle Overview & Setup
  3. 01:17Beginning the 500 Round Test
  4. 03:31First Malfunction Observed
  5. 04:04Troubleshooting Malfunctions
  6. 06:36Eight Magazines In: Break-in Progress
  7. 06:41Suppressor Testing Begins
  8. 07:30Suppressor Performance & Recoil
  9. 08:44Suppressor Loosening Issue
  10. 10:02Suppressor Retention Check
  11. 11:05Final Mags & Heat
  12. 12:30Internal Inspection: 500 Rounds
  13. 13:11Detailed Metal Movement Analysis
  14. 15:11Trunnion & Carrier Inspection
  15. 16:39500 Round Conclusion & Next Steps

Frequently Asked Questions

What were the initial performance issues with the Riley Defense 7.62x39 Krink?

During the first 500 rounds, the Riley Defense 7.62x39 Krink experienced malfunctions, including a failure to extract a live round. The magazine well also felt tight initially, though it loosened up as the rifle broke in.

How did the Riley Defense Krink perform with a suppressor?

The rifle shot with less felt recoil when suppressed compared to using a muzzle booster. However, the suppressor itself had a tendency to loosen during firing, requiring periodic tightening.

What internal wear was observed after 500 rounds in the Riley Defense Krink?

After 500 rounds, minor metal movement was noted on the bolt carrier tail and around the fixed ejector channel. This is considered typical break-in wear for AK-style firearms, and the parts appeared to be polishing rather than excessive wear.

Is the Riley Defense 7.62x39 Krink considered reliable after its initial break-in period?

While the rifle had some initial malfunctions, these seemed to decrease as the rifle broke in over the 500 rounds. The reviewer suggests that the gun cleaned up significantly and performed better towards the end of the test.

Related News

All News →

More Reviews Videos You Might Like

More from KLAYCO47

View all →