Radical Firearms Integrally Suppressed Rifle Review

Published on August 17, 2020
Duration: 21:46

This review covers the Radical Firearms integrally suppressed rifle, highlighting its NFA-friendly 17-inch overall length achieved by pinning a suppressor to a 10.5-inch barrel. Accuracy tests showed sub-MOA potential with specific loads, and sound metering averaged 136.9 dB, significantly quieter than unsuppressed firearms. The build features quality materials like 416R stainless steel and Grade 5 Titanium, with a forged 7075-T6 receiver and an MPI-inspected BCG.

Quick Summary

The Radical Firearms Integrally Suppressed Rifle is NFA compliant with a 17-inch overall length, achieved by pinning a suppressor to a 10.5-inch barrel. It demonstrated sub-MOA accuracy with specific loads and averaged 136.9 dB, offering significant sound reduction.

Chapters

  1. 00:00Introduction & NFA Status
  2. 01:34Accuracy Testing Results
  3. 05:29Sound Metering Performance
  4. 07:52Barrel & Suppressor Specs
  5. 12:12Upper Receiver & BCG Details
  6. 14:28Lower Receiver & Furniture
  7. 17:52Reliability, Pricing & Value

Frequently Asked Questions

What makes the Radical Firearms Integrally Suppressed Rifle NFA compliant?

The rifle is NFA compliant because its overall length is 17 inches. This is achieved by permanently attaching a 10.5-inch barrel to the integral suppressor, resulting in a legal configuration that does not require a Short-Barreled Rifle (SBR) tax stamp.

How accurate is the Radical Firearms Integrally Suppressed Rifle?

Accuracy tests at 100 yards showed promising results. The rifle achieved a 1.5-inch group with Pine Valley 62gr, a 1.25-inch group with Federal 55gr TSX, and a 1-inch group with Gorilla 69gr Match. Notably, Winchester 69gr Match ammunition produced a sub-MOA group of just 0.6 inches.

What is the sound level of the Radical Firearms Integrally Suppressed Rifle?

During testing, the rifle averaged a sound signature of 136.9 decibels (dB). This is significantly quieter than a typical unsuppressed 10.5-inch barrel, which usually meters around 170 dB, demonstrating the effectiveness of the integral suppressor design.

What materials are used in the Radical Firearms Integrally Suppressed Rifle's construction?

The barrel is 416R stainless steel with a 1:7 twist. The suppressor sleeve is Grade 5 Titanium, and the baffles are 416R stainless steel. The upper and lower receivers are forged 7075-T6 aluminum, and the BCG features an MPI-inspected 9310 steel bolt.

More Reviews Videos You Might Like

More from Mrgunsngear Channel

View all →