Silencer Safety Test 001 | Stealth Additive Works Ekron

Published on March 20, 2026
Duration: 10:16

This video details a destructive test of the Stealth Additive Works Ekron 5.56mm suppressor, chambered in .223. The test aimed to determine its durability under rapid fire conditions. The suppressor, mounted on a 7.5-inch AR-15 with a Plan B muzzle brake and Breek Arms hub, failed catastrophically after only 87 rounds, detonating outwards. The instructor highlights the importance of understanding suppressor failure modes and material limitations, emphasizing that even titanium cans are not indestructible.

Quick Summary

The Stealth Additive Works Ekron suppressor, made of 3D-printed Grade 5 Titanium, failed catastrophically after only 87 rounds during a destructive durability test. The suppressor detonated outwards, a dangerous failure mode that underscores the importance of understanding material limitations and testing protocols.

Chapters

  1. 00:00Suppressor Introduction and Test Goal
  2. 00:18Test Methodology Details
  3. 00:51Equipment Setup and Mount
  4. 01:09Funding and Disclosures
  5. 01:43Sponsors and Disclaimers
  6. 02:26Safety Precautions and Research Purpose
  7. 03:48Suppressor Test Firing Begins
  8. 04:35Test Results: Round Count & Failure Mode
  9. 04:59Post-Test Analysis & Material Discussion
  10. 05:21Titanium vs. Inconel & Failure Concerns
  11. 06:04Anticipated vs. Actual Performance
  12. 07:10Lessons Learned and Safe Shooting Advice
  13. 07:28Failure Analysis & Super Safeties
  14. 08:14Final Round Count & Failure Summary
  15. 08:47Future Tests and Suppressor Expectations
  16. 09:30Manufacturer Response & Personal Cans
  17. 09:52Conclusion and Support Request

Frequently Asked Questions

How many rounds did the Stealth Additive Works Ekron suppressor withstand before failing?

The Stealth Additive Works Ekron suppressor failed catastrophically after enduring 87 rounds during a rapid-fire durability test. It detonated outwards, highlighting a dangerous failure mode.

What was the failure mode of the Stealth Additive Works Ekron suppressor?

The Stealth Additive Works Ekron suppressor experienced a catastrophic failure, described as 'hand-grenading out the side.' This means it blew apart outwards, posing a significant safety risk to nearby individuals.

What materials is the Stealth Additive Works Ekron suppressor made from?

The Stealth Additive Works Ekron suppressor is constructed from 3D-printed Grade 5 Titanium. Despite this material, it did not meet expectations for durability under rapid fire.

What safety precautions were taken during the suppressor destructive test?

During the test, extreme safety precautions were implemented, including the use of ballistic shields and an enclosed range with a moving background. Camera equipment was also protected.

More Reviews Videos You Might Like

More from Desk Pop

View all →