How to Install Holosun 407k /507k on Hellcat Pro

Published on July 30, 2024
Duration: 3:02

This guide details the process of installing a Holosun 407k or 507k red dot sight onto a Springfield Armory Hellcat Pro pistol. It emphasizes the necessity of a CH Precision optic plate adapter to convert the Hellcat Pro's slide footprint. The installation involves cleaning the slide, mounting the adapter plate, securing the optic with provided screws, and torquing them to 12 inch-pounds for optimal reliability. Marking the screws is recommended to monitor for loosening.

Quick Summary

To install a Holosun 407k or 507k on a Springfield Armory Hellcat Pro, use a CH Precision optic plate adapter. Ensure the slide is clean, mount the plate, then the optic, securing with provided screws. Torque screws to 12 inch-pounds (in-lbs) using a torque screwdriver and mark them with paint to monitor for loosening.

Chapters

  1. 00:00Introduction and Overview
  2. 00:43Preparation and Cleaning
  3. 01:13Mounting the Optic Plate
  4. 01:24Attaching the Holosun Optic
  5. 01:56Screwing and Snugging
  6. 02:08Torquing the Screws
  7. 02:39Marking Screws for Security
  8. 02:53Conclusion and Range Prep

Frequently Asked Questions

What adapter plate is needed to install a Holosun 407k or 507k on a Springfield Armory Hellcat Pro?

You will need a specific optic plate adapter, such as one from CH Precision, to convert the Hellcat Pro's slide footprint to be compatible with Holosun 407k or 507k optics.

What is the recommended torque setting for mounting a Holosun optic on a Hellcat Pro with an adapter plate?

The recommended torque setting for mounting the optic and adapter plate on a Springfield Armory Hellcat Pro is typically 12 inch-pounds (in-lbs). Using a torque screwdriver ensures proper tightness without overtightening.

How can I ensure the optic mounting screws on my Hellcat Pro do not back out?

To prevent optic mounting screws from backing out, you can use blue Loctite on the threads and mark the screws with a paint pen. This provides a visual cue to check if they have loosened over time.

Do the Springfield Armory Hellcat Pro and Hellcat Pro Comp have the same optic footprint?

Yes, the Springfield Armory Hellcat Pro and the Hellcat Pro Comp share the same optic footprint, meaning they can both utilize the same adapter plates and compatible optics like the Holosun 407k or 507k.

Related News

All News →

More Tactical & Gear Videos You Might Like

More from 1st Shot Tactical

View all →