How to get the BEST zero for your LPVO 🔥 #guns #shorts

Published on February 13, 2024
Duration: 1:00

This guide details the process of confirming and re-zeroing a rifle equipped with an LPVO. It emphasizes gathering ballistic data, establishing a zero distance, and verifying holdovers at various ranges. The instructor demonstrates how to account for ammunition drop and adjust aim points based on observed offsets to achieve accurate hits.

Quick Summary

To get the best zero for your LPVO, start by gathering ballistic data like velocity and ballistic coefficient. Then, decide on your zero distance, confirm it, and test your holdovers at various ranges. For example, an offset of 3 inches low at 165 yards means you need to aim slightly low to hit your intended target.

Chapters

  1. 00:09Gathering Ballistic Data & Choosing Zero
  2. 00:13Confirming Zero & Verifying Holds
  3. 00:25Zeroing Example: 225 Yards & 75 Grain Ammo
  4. 00:38Reticle Hold Points Explained
  5. 00:44Offset Verification at 165 Yards
  6. 00:51Adjusting Aim for Accuracy
  7. 00:56Final Confirmation on Paper

Frequently Asked Questions

What are the essential first steps for zeroing or re-zeroing a rifle with an LPVO?

The critical first steps involve gathering your ammunition's ballistic data, including velocity and ballistic coefficient. You then need to decide on your desired zero distance and confirm that initial zero before proceeding to test and verify your holdovers at various ranges.

How do you verify your holdovers after establishing an LPVO zero?

To verify holdovers, you test your rifle at different distances. For instance, if you have a 225-yard zero, you'd shoot at 165 yards and note the offset. If you're hitting low, you'll need to aim slightly higher than your point of impact to compensate.

What specific ammunition and optic are used in this LPVO zeroing demonstration?

This demonstration utilizes G9 Defense 75-grain ammunition and a Vortex 1-10 Low Power Variable Optic (LPVO). The instructor explains how the drop of this specific round through the reticle of this optic makes him happy for his chosen zero.

What is the practical application of confirming an LPVO zero at 165 yards?

Confirming the zero at 165 yards helps determine the rifle's actual point of impact relative to the aiming point. In this case, an offset of about 3 inches low means the shooter must aim slightly low on a target to achieve a hit, verifying the holdover adjustments.

Related News

All News →

More Training & Techniques Videos You Might Like

More from Farewell Firearms Training

View all →