How to load and unload a single action revolver. #revolver #guns #western #colt #pistol #history #us

Published on January 5, 2023
Duration: 0:58

This guide demonstrates the proper loading and unloading procedures for a single-action revolver, specifically a .45 Colt model. Key steps include opening the loading gate, setting the hammer to half-cock for cylinder rotation, and loading cartridges individually. Unloading involves the same gate and half-cock position, followed by using the ejector rod to clear casings.

Quick Summary

To load a single-action revolver, open the loading gate on the right side and pull the hammer to the half-cock position. This allows the cylinder to rotate, so you can insert cartridges one by one. For unloading, repeat the gate opening and half-cock step, then use the ejector rod to eject each casing.

Chapters

  1. 00:00Introduction & Preparation
  2. 00:05Loading Procedure Explained
  3. 00:30Unloading Procedure Explained

Frequently Asked Questions

What is the first step to load a single-action revolver?

The first step is to open the loading gate, typically located on the right side of the frame. Then, pull the hammer back to the half-cock position to allow the cylinder to rotate freely.

How do you safely unload a single-action revolver?

To unload, open the loading gate and set the hammer to half-cock. Then, use the ejector rod under the barrel to push each casing out of the cylinder, one chamber at a time.

Why is the half-cock position important for single-action revolvers?

The half-cock position is critical because it allows the cylinder to rotate freely, enabling you to load or unload cartridges into each chamber sequentially.

What caliber is the revolver shown in the video?

The video specifically shows the loading and unloading of a single-action revolver chambered in .45 Colt.

Related News

All News →

More Training & Techniques Videos You Might Like

More from The Gun Guy Cody

View all →