Revolver Malfunctions: Into the Fray Episode 116

Published on May 31, 2016
Duration: 3:16

This video from USCCA's 'Into The Fray' series, hosted by Kevin Melowski, addresses a specific revolver malfunction: the ejector star overrun. Melowski explains that while revolvers are generally reliable, mistreatment or wear can lead to issues. He details how an ejector star can overrun a shell casing, rendering the revolver inoperable until cleared. The guide provides a step-by-step technique for clearing this malfunction by manually removing the stuck casing, emphasizing that this is not a quick process suitable for a gunfight.

Quick Summary

An ejector star overrun is a revolver malfunction where the ejector star runs over the lip of a shell casing, preventing cylinder closure. To clear it, fully extend the ejector rod, use a fingernail to pry under the casing rim, and remove the stuck case. This issue often stems from a worn ejector rod return spring or damaged ejector star due to mistreatment.

Chapters

  1. 00:00Introduction to Revolver Malfunctions
  2. 00:16Why Revolver Malfunctions Happen
  3. 00:44Focus on the Ejector System
  4. 01:03Simulating a Malfunction Scenario
  5. 01:39Ejector Star Overrun Explained
  6. 01:53Impact of Overrun on Operation
  7. 02:00Clearing the Ejector Star Overrun
  8. 02:13Why This Malfunction is Critical
  9. 02:27Importance of Ejector System Care
  10. 02:42Revolver Malfunctions are Catastrophic
  11. 02:55Overcoming Malfunctions
  12. 03:01Conclusion and Subscription

Frequently Asked Questions

What is an ejector star overrun in a revolver?

An ejector star overrun occurs when the ejector star, responsible for pushing out spent casings, extends too far and runs over the lip of a shell casing. This prevents the cylinder from closing properly, rendering the revolver inoperable until the obstruction is cleared.

How do you clear a revolver ejector star overrun malfunction?

To clear an ejector star overrun, you must manually remove the stuck casing. This involves fully extending the ejector rod, using a fingernail to get under the rim of the casing, and carefully pulling it out. This process is not quick and requires deliberate action.

What causes a revolver ejector star overrun?

This malfunction can be caused by a worn-out ejector rod return spring or a damaged ejector star. It often results from mistreating the revolver, such as excessively whipping the cylinder around, rather than assuming it's unbreakable.

Are revolver malfunctions dangerous?

While revolvers are generally reliable, their malfunctions are typically 'catastrophic' in the sense that they take the shooter out of the fight. They don't usually involve the firearm exploding or causing injury, but they render the gun inoperable until cleared.

Related News

All News →

More Training & Techniques Videos You Might Like

More from USCCA

View all →