Videos tagged with Rifle Scope Installation

This guide details the installation and zeroing process for the Gunnr Heimdall 6-24x50 FFP scope, based on expert insights from Buckeye Ballistics. It covers mounting procedures using the specific Gunnr cantilever mount and initial zeroing at 50 yards, followed by adjustments for longer ranges using the reticle's MOA sub-tensions. The review highlights the scope's clarity, robust construction, and suitability for calibers like .223 Remington at distances up to 500 yards.

This video highlights a potential discrepancy in how Burris instructs users to orient their XTR rings for the XTRPS scope. The speaker believes Burris incorrectly identifies the front of the scope, which could impact proper MOA adjustment for long-range shooting. Users are advised to consult the directions carefully.

This video provides an unboxing and overview of the Sig Sauer Tango-MSR 1-10x26mm LPVO, including its included cantilever mount. The presenter demonstrates battery installation, illumination control, reticle features, and the process of mounting the optic to a rifle using specific torque values. The review highlights its front focal plane design and BDC-10 reticle, offering insights into its performance and value for budget-conscious buyers.

This guide details a precise method for mounting a rifle scope using bubble levels and a vise to ensure perfect alignment. The process emphasizes leveling the firearm receiver and barrel, then matching the scope's reticle to this level plane. It highlights the importance of incremental tightening and using a torque wrench to prevent damage and ensure consistent performance. The Wheeler UltraScope Mounting Kit is presented as a comprehensive tool for this task.

This video provides a practical guide to zeroing the Victor Optics S6 6-24x50 FFP rifle scope, demonstrating how to use its First Focal Plane reticle for precise adjustments. The presenter, Naaming, walks through the process of firing shots, measuring impact deviation using the reticle, and adjusting the scope's turrets. The guide also covers setting the zero stop and checking group consistency, highlighting the scope's smooth adjustments and overall quality.

This guide details the installation of a Galilean telescopic sight, specifically the Lattey model, onto a Short Magazine Lee-Enfield (SMLE) rifle, as demonstrated by firearms expert Jonathan Ferguson. It covers the mounting of both front and rear sight components, highlighting the need for potential hand-fitting due to manufacturing tolerances and the requirement for a specific handguard modification for the rear sight. The video emphasizes that while these sights were adopted in 1915, they represented a 'wrong turn' in sniper sight development due to inherent optical limitations.

This guide details the installation and zeroing process for the ATN ThOR LT thermal riflescope, based on insights from Gun Talk Media's "The ThOR LT" episode. It emphasizes practical application for night hunting and hog control, featuring input from ATN representative Steve Lemenov and professional hog control operator Shane Kessler. The scope is presented as a value-priced, user-friendly option for effective thermal imaging in challenging conditions.

This guide details the process of setting the Heads-Up Display (HUD) zero on the REVIC PMR428 Smart Rifle Scope. It explains that HUD zero is typically set after mechanically zeroing the scope and involves the scope calculating complex environmental factors like inclination, temperature, pressure, and elevation offset. The process is straightforward, involving navigating to the settings menu and holding the enter button to set the zero angle, which is crucial for accurate ballistic calculations.

This guide details the installation and zeroing process for the Discovery VTR 4-16X44SF scope, a budget-friendly optic. It covers essential steps like proper scope mounting, ensuring a level reticle using bubble levels, parallax adjustment via the side focus, and an efficient zeroing technique. The instruction comes from an experienced shooter, demonstrating professional techniques for accurate setup.

This guide details the installation of a Vortex Viper PST 1-4x24 Riflescope onto a Ruger Mini-14 using Warne quick-detach scope mounts. It covers essential safety checks, mount selection, proper ring attachment, scope positioning for eye relief, and secure tightening procedures. The process emphasizes the benefits of QD mounts for the Mini-14 platform, as explained by an experienced firearms reviewer.

This guide details the installation and zeroing process for Vortex Crossfire II rifle scopes, specifically the 4-12x44 and 3-9x40 models, on an AR-15 platform. It emphasizes proper mounting, eye relief adjustment, and using the 1/4 MOA turrets and Dead-Hold BDC reticle for accurate shooting at 100 yards. The information is presented with practical advice from an experienced gear reviewer.

This guide details how to set the Zero Stop feature on Nightforce rifle scopes. The Zero Stop prevents the elevation turret from being dialed below the established zero point, which is crucial for long-range shooters and tactical applications. The process involves loosening turret set screws, exposing an internal clutch, adjusting the turret to the zero stop point, and then re-securing the turret cap.