Brownells - Jack Rowe, Master Gunsmith Series, Strip and Clean Box Lock. Part 5 of 5.

This content demonstrates the disassembly and reassembly of a Ruger Mini-14, highlighting a critical issue with the trigger group breaking. The speaker, exhibiting experienced firearm handling, shows the broken components and guides through the reassembly process. The video also touches on suppressed shooting and gas management.

This guide details the process of replacing a faulty extractor on a 2011-platform handgun, specifically addressing recurring extraction failures experienced with the Bul Armory SAS II Ultralight. The video demonstrates the installation of an Atlas Gunworks extractor, a common aftermarket upgrade for 2011s, and highlights the importance of proper tensioning for reliable firearm function. The speaker, an experienced firearms instructor, provides practical advice based on extensive troubleshooting and range testing.

This expert-level guide details the assembly and disassembly of the Ruger Red Label III over/under shotgun. It emphasizes safety protocols, including ensuring the firearm is unloaded and wearing safety glasses. The process involves separating the receiver/stock from the barrel/fore-end, with specific instructions for fore-end removal and reattachment. Crucially, it highlights the need to fully move the top lever right before barrel installation to avoid damage, followed by a function check of the safety and barrel selector.

This guide provides expert-level instructions for cleaning the Ruger Red Label III Over/Under Shotgun, drawing from a Ruger Firearms Tech Tip. It details a comprehensive step-by-step process for disassembly, cleaning individual components like the bore, choke tubes, receiver, and fore-end, and proper reassembly. The guide emphasizes critical safety precautions throughout the procedure, including the use of safety glasses and ensuring the firearm is unloaded.

This guide details the reassembly process for the Ruger 10/22 Rifle, presented by a Ruger firearms instructor. It emphasizes safety precautions, including the removal of ammunition and the use of safety glasses. The steps cover the reinstallation of the charging handle, bolt, receiver plug, bolt stop pin, and fire control group, followed by stock attachment and action screw tightening. Crucially, it concludes with essential function checks to ensure proper operation.

This expert-level guide details the step-by-step disassembly of the Ruger 10/22 rifle, as demonstrated by Ruger Firearms. It emphasizes crucial safety precautions, including confirming the firearm is unloaded and wearing safety glasses. The process requires minimal tools: a 5/32 Allen key and a small punch, making it accessible for routine maintenance and cleaning.

This video details the installation of a Geissele MK8 Super Modular Rail on an AR-15. Key steps include using a Geissele Reaction Rod for upper receiver stability, proper torquing of the proprietary barrel nut, and secure installation of the gas block and tube. The rail is then slid on and secured with two cross-bolts using a T-handle hex wrench. Final steps involve muzzle device installation and a thorough inspection.

Proper ammunition storage is crucial for maintaining reliability and safety. Avoid storing ammo in cardboard boxes in damp environments, as this leads to moisture absorption and corrosion. Utilize airtight containers like ammo cans and control humidity with desiccants like silica gel packs. Heat accelerates gunpowder and primer degradation, so store ammo at stable room temperatures. Reloading primers are particularly vulnerable to moisture and require strict airtight storage.

This video demonstrates how to upgrade an AR-15's A2 furniture to Magpul components. It details the removal of the A2 grip using a Bondhus hex set and the installation of a Magpul MIAD grip with interchangeable backstraps for improved ergonomics. The process also covers preparing and installing the Magpul PRS stock, highlighting its adjustable features for cheek weld and length of pull.

This video explores the custom Remington 11-87 shotgun used as a prop in 'No Country for Old Men.' The film required a semi-automatic shotgun with a suppressor, a combination not readily available at the time. Prop master Larry Zanoff details how a non-functional, 'homemade' looking suppressor was custom-built for the 11-87, with the iconic silenced sound effect achieved entirely in post-production.