BUILD BOX: Pistol Caliber Creation Pt. 2 | Gun Talk Media

Published on November 8, 2022
Duration: 22:01

This video documents a 'Build Box' challenge where participants construct and customize pistol caliber carbines (PCCs) within a time limit. It highlights the assembly process, including common pitfalls like trigger pin issues and incorrect castle nut installation. Customization through painting and the importance of function checks and test firing are emphasized, showcasing the challenges of building a reliable and aesthetically pleasing firearm under pressure.

Quick Summary

During a Pistol Caliber Carbine (PCC) build challenge, common mistakes include incorrect castle nut installation, trigger pin issues, and forgetting the bolt catch. Proper preparation for painting involves cleaning with acetone. The bolt catch is vital for safety, ensuring the bolt locks open after the last round.

Chapters

  1. 00:00Build Box Challenge Introduction
  2. 00:11Mystery Advantage: Judgment Day
  3. 00:23Trigger Pin Issues
  4. 00:36Time Check and Judge Interaction
  5. 00:50History of Gun Building
  6. 01:16Build Box Segment Start
  7. 01:45Range Challenge Introduced
  8. 02:10Dremel and Range Time
  9. 02:24Sig 22 with Red Dot
  10. 02:55Range Challenge Feedback
  11. 03:15Transition to Painting
  12. 03:35Painting Process: Zebra Stripes
  13. 03:55Textured Paint Technique
  14. 04:17Castle Nut and Back Plate Errors
  15. 05:01Lost Parts Recovery
  16. 05:17Final 10-Minute Countdown
  17. 05:3330 Minutes Remaining
  18. 05:39Desert/Ghetto Theme Inspiration
  19. 06:10Assembly Challenges
  20. 06:19Trigger Malfunction Fear
  21. 06:34Build Box Sponsors
  22. 06:55Trigger Pin Struggle
  23. 07:07Trigger Installation Success
  24. 07:16Trigger Issue Resolution
  25. 07:48Functionality Test
  26. 08:02Assembly and Painting Status
  27. 08:24Paint Job Inspiration: Thin Red Line
  28. 08:44Red Accents Tradition
  29. 09:05Paint Job Feedback
  30. 09:18Bonus Box Discussion
  31. 09:43Scratches and Battle-Worn Finish
  32. 09:58Two Minutes Left
  33. 10:02Paracord Option
  34. 10:13Ursula Painting
  35. 10:16One Minute Left
  36. 10:32Time's Up
  37. 10:44Post-Build Reflections
  38. 10:55Feelings After the Build
  39. 11:06Heading to the Range
  40. 11:13Concerns about Barrel Length
  41. 11:28Range Test Begins
  42. 11:32Ursula's Gun Test
  43. 11:41Leading the Competition
  44. 12:05Buffer System Tuning
  45. 12:24Dead Trigger Malfunction
  46. 12:31Trigger Reservations Confirmed
  47. 12:43Empathy for Malfunctions
  48. 13:06First Five Rounds Test
  49. 13:24Pistol vs. Rifle Testing
  50. 13:39True's Shooting Performance
  51. 13:56Adam's Nervousness
  52. 14:15Adam's Gun Shooting Spot On
  53. 14:30Comparison to Other Builds
  54. 14:39Trigger Finger Fatigue
  55. 14:54Illegal Trigger Finger?
  56. 15:00Piece Flying Off Gun
  57. 15:15Anxiety Over Part Failure
  58. 15:23Final Judgment Preparation
  59. 15:30Build Box Sponsors (Part 2)
  60. 15:51Final Judging: Ursula's Pistol
  61. 15:57True's Feedback on Ursula's Build
  62. 16:31Trigger Issue with Ursula's Build
  63. 16:42Final Judging: Kenzie's Carbine
  64. 16:48Chris's Feedback on Kenzie's Build
  65. 16:55Bolt Hold Open Omission
  66. 17:18Adam's Build Feedback
  67. 17:33Muzzle Brake Installation Error
  68. 17:40Trigger Time vs. Small Parts
  69. 18:01All Parts Used
  70. 18:03Piece Flying Off Adam's Gun
  71. 18:25Tight Race Assessment
  72. 18:42Build Box Recap
  73. 18:59Issues Identified
  74. 19:02Ursula's Build Verdict
  75. 19:17Ursula's Trigger Issue
  76. 19:29Ursula's Magazine Choice
  77. 19:34Kenzie's Build Verdict
  78. 19:38Bolt Catch Problem
  79. 19:52Kenzie's Inspiring Build
  80. 20:02Kenzie's Pride
  81. 20:09Adam's Build Verdict
  82. 20:19Part Flying Off Adam's Gun
  83. 20:26Adam's Fireman Build
  84. 20:36Confirmation of Part Failure
  85. 20:44Tight Race Conclusion
  86. 20:48Winner Announcement Suspense
  87. 21:00Adam Wins Build Box Challenge
  88. 21:11Adam's Underdog Victory
  89. 21:19Congratulations to Adam
  90. 21:47Where to Find Parts and Tools

Frequently Asked Questions

What are common mistakes made during a Pistol Caliber Carbine (PCC) build?

Common mistakes include installing the castle nut backwards, improper trigger pin installation leading to walking pins, forgetting critical components like the bolt catch, and incorrect installation of muzzle devices like self-timing brakes.

How can a firearm's surface be prepared for a custom paint job?

To prepare a firearm for painting, thoroughly clean the surface with acetone. This removes fingerprints, grease, sweat, and any other contaminants that could prevent the paint from adhering properly.

Why is the bolt catch important on an AR-style rifle?

The bolt catch is a crucial safety and functional component. It allows the bolt to be manually locked open and ensures the bolt automatically locks open after the last round is fired, indicating an empty magazine.

What is the significance of a self-timing muzzle brake?

A self-timing muzzle brake is designed to align correctly on the barrel without the need for shims. Proper installation involves threading it on until it seats, and using shims is generally incorrect for these devices.

More Gunsmithing & DIY Videos You Might Like

More from Gun Talk Media

View all →